Extreme Engineering Solutions Inc.

XPedite5201

Freescale MPC8548E PowerQUICC™ III Processor-Based Conduction-Cooled PMC/XMC Module

The Extreme Engineering Solutions XPedite5201 is a high-performance, conduction-cooled Processor PCI Mezzanine Card (PrPMC) / Express Mezzanine Card (XMC) featuring the Freescale MPC8548E PowerQUICC III processor running at up to 1.333 GHz. The on-board PowerQUICC III provides integrated 64-bit PCI-X, DDR2-400/533 SDRAM, PCI Express, and two Gigabit Ethernet interfaces, making the XPedite5201 an optimal solution for communications processing and general computing applications alike.

XMC (VITA 42)

When used as an XMC (VITA 42) module, the x8 PCI Express interface can be used, in parallel or in substitution of the PCI-X interface. With software supplied by Extreme Engineering Solutions, the XPedite5201 can be installed on standard VME and CompactPCI (cPCI) platforms as well as custom motherboards that support PMC sites.

Gigabit Ethernet

The XPedite5201 provides two Gigabit Ethernet interfaces via the P14 backplane connector.

Processor

• Freescale MPC8548E PowerQUICC III processor
• Embedded PowerPC e500 core at 1.0 to 1.333 GHz
• 3065 MIPS at 1.333 GHz
• 32 KB L1 instruction/data caches
• 512 KB L2 cache
• Double-precision floating point unit
• Integrated MMU
• DDR2-533 SDRAM interface
• x8 PCI Express
• 133-MHz, 64-bit PCI-X 1.0a interface
• Four 10/100/1000-Mbps, IEEE 802.3-compliant Ethernet controllers
• Two serial controllers
• Two I²C controllers

Memory

• 1 GB to 4 GB DDR2-533 SDRAM
• Up to 256 MB NOR flash
• 1 GB to 4 GB NAND flash
• 2 KB serial EEPROM

XMC

• x8 PCI Express (VITA 42.3)
• IPMI FRU support
• GPIO on user data

Real Time Clock

• M41T00 I²C Timekeeper
• 60-hour clock retention

Rear I/O

• Two Gigabit Ethernet ports
• Four GPIO pins
• Two RS-232 serial ports

Software Support

• Linux LSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP

Physical Characteristics

• PMC/XMC conduction-cooled form factor
• Dimensions: 149 mm x 74 mm, 10-mm stacking height

Environmental Requirements

• Supported ruggedization levels (see chart below): Level 1, Level 2, Level 3, Level 4, Level 5
• Humidity: 0% to 95% non-condensing

Power Requirements

• Maximum power consumption: 13.35 W (with 1.333-GHz processor) 10.5 W (with 1-GHz processor)

Please contact Sarsen Technology on +44 1672 511166 for technical support, pricing and lead time information on the XPedite8000 PrPMC module or the full range of Extreme Engineering Solutions Freescale PowerPC embedded products.