Extreme Engineering Solutions Inc.

XPedite6032

Conduction or Air Cooled 3U cPCI Module Based on the Freescale PowerPC 7447A Processor

The Extreme Engineering Solutions XPedite6032 is a high-performance Conduction or Air Cooled 3U CompactPCI (cPCI) module that dissipates less than 18 Watts and is capable of operating at up to 85C at the external thermal interface, without forced air flow (Conduction Cooled version) or up to 55 C ambient air temperature with 300LFM airflow (Air Cooled Version). The XPedite6032 can also host one single width Conduction Cooled PMC (CCPMC) or standard Air Cooled PMC. The XPedite6032 is tolerant of 40g peak/6ms half sine shock, random vibration of 0.1g2/Hz from 50 to 2000Hz, and swept sinusoidal vibration of 0.06inch/10g peak amplitude from 10 to 500Hz.

Freescale 7447A

The XPedite6032 utilizes the Freescale 7447A embedded PowerPC Processor and Marvell Discovery III System Controller. XPedite6032 provides up to 512MB DDR SDRAM, up to 128MB of AMD Mirrorbit (NOR) Flash, two RS232/422 serial ports, a 33/66MHz cPCI interface and 66/100/133MHz PCI-X PMC Interface. The serial and two Gigabit Ethernet interfaces are accessible through the backplane J2 connector along with a subset of the PMC's P14 I/O. XPedite6032 can be built as a system or peripheral cPCI module (specify when ordering).

Extended Temperature

The XPedite6032 is ideal for 3U cPCI applications in commercial or extended temperature, shock, and vibration environments that require high bandwidth and processing performance.

Processor

• Freescale PowerPC MPC7447A Processor
• 1.0GHz Max Processor Speed (Air Cooled)
• 133MHz Bus Speed
• 32K L1 Instruction/Data Caches
• 512KB L2 Cache/SRAM

Conduction Cooled

• Operates at up to 85C at the external thermal interface

Air Cooled

• Operates at up to 55C ambient air temperature with 300LFM airflow

PCI-X PMC Slot

• Maximum Aggregate Bandwidth of 1GBs
• Processor PMC (PrPMC) Support

Software Support

• VxWorks BSP
• Linux LSP
• LynxOS BSP
• Green Hills INTEGRITY BSP
• QNX Neutrino BSP

Non-Volatile Storage

• Supports up to 128MB Surface Mount NOR Flash
• 4KB Serial EEPROM
• 128KB Simtek NVSRAM

Shock / Vibration

• 40g peak half sine, 6ms
• 0.1g2/Hz from 50 to 2000Hz
• 0.06"/10g from 10 to 500Hz

Power Requirements

(800MHz CPU, 266MHz DDR, Measured Max)

• +3.3V 5.20A 17.16W
• +5.0V 0.05A 0.25W
• +12.0V 0.00A 0.00W
• -12.0V 0.00A 0.00W

Ethernet

• Two 10/100/1000Mbps Ports
• Rear I/O

DDR SDRAM

• Supports up to 512MB
• Operates at up to 266MHz
• Peak memory bandwidth of 2.6GBps

Rear I/O

• Two Gigabit Ethernet Ports
• Two RS232/422 Serial Ports
• One I2C Port
• Four Discrete GPIO

Physical

• 3U cPCI Form Factor
• 100mm x 160mm

Operating Temperature

• -40 to +85C at thermal interface (conduction cooled)
• 0 to +55C ambient (air cooled, 300LFM airflow required)

Humidity

• 0% to 85%

Storage Temperature

• -40 to +125C

Please contact Sarsen Technology on +44 1672 511166 for technical support, pricing and lead time information on the full range of Extreme Engineering Solutions Freescale Semiconductor embedded products.