FPGA
- Intel® Stratix® 10 GX 2800 KLEs
- PCIe Gen3 x16, Gen4 x8 capable
Board Programming
- Max10 USB Blaster on board, UART over USB interface
- 1x Nor Flash 1GB quad SPI FPGA AS configuration
- 1x Nor Flash 1GB for configuration mode ST8
- Board Management Controller (BMC) for monitoring, EPCQ and clock programming
Memory
- 2x banks DDR4 vertical RDIMM, 16GBytes each (32GBytes capable), x72bit, up to 2400MT/s
- 1x bank DDR4, bus x72, 8GBytes up to 2400MT/s (HPS bank mutual with FPGA)
Communication & Interfaces
- 2x FireFly™ Samtec quad connector (28Gb/s each XCVR) - 1 FireFly™ connected to 100G IP
- MiniSAS quad connector (1 HD SAS, 4 SATA HDD, NVMe interface capable)
- GPIO extension connector : 9 LVDS usable as 18 LVCMOS
- XCVR extension connector : 10 XCVR, 8 LVDS, Clock In&Out
- 48 dedicated HPS IO connector (daughter board for SX)
- 1x Ethernet SGMII interface (to FPGA), Marvel PHY 88E11
Clock Circuitry
- Programmable PLL oscillator (Si5341), output clocks frequency between 0.0001 MHz to 750 MHz
- High precision oscillator, clock accuracy 20MHz- 0.01ppm for Precision Time Protocol (PTP) IEEE 1588
- One coax connector for PPS (pulse per second)
Board Size
- Length : 254 mm (10 inches)
- Height : 111.15 mm (4.38 inches) / Standard Height PCIe
- Dual slot PCIe
Power : Max 240W, delivered with active heat-sink
Operating Range : 0°C to 40°C
Storage Temp Range : 0°C to 70°C
Kit Ordering Information
RXCS10X280HPF50-IDK00A - Development Kit, Intel® Stratix® 10 FPGA, H-Tile version (1SG280HU1F50E2VG)
Please contact Sarsen Technology to arrange a quote.