TOTAL: £0.00
home

email


Products

XPedite7530


Overview

5th Gen Intel® Core™ i7 (Broadwell-H) Processor-Based 3U cPCI Module

The XPedite7530 from Extreme Engineering Solutions (X-ES) is a high-performance 3U CompactPCI single board based on the 5th generation Intel® Core™ i7 Broadwell-H processor.  the board supports up to 8 GB of DDR3L-1600 ECC SDRAM, XMC/PrPMC support, and up to 32 GB of NAND flash. The XPedite7530 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485 through the backplane connectors.  

 

Technical

  • Supports 5th generation (Broadwell-H) and 4th generation (Haswell) Intel® Core™ i7 processors
  • 3U CompactPCI module
  • Configurable as system controller or peripheral
  • Conduction or air cooling
  • Up to 8 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 32 GB of NAND flash
  • XMC/PMC interface
  • Two Gigabit Ethernet ports
  • Four SATA ports
  • Two USB 2.0 ports
  • One graphics port
  • Two RS-232/422/485 serial ports
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks BSPs

Specifications

Processor

  • 5th generation Intel® Core™ i7 (Broadwell-H)
  • 4th generation Intel® Core™ i7 (Haswell)
  • Integrated high-performance 3D graphics controller
  • Up to Intel® Iris™ Pro Graphics 6200
  • Up to 8 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 32 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

J1 cPCI Interface

  • 32-bit PCI interface operating at 33 MHz or 66 MHz
  • System controller-capable with onboard clocking and arbitration
  • Peripheral slot-capable

J2 cPCI Interface

  • Two 10/100/1000BASE-T Gigabit Ethernet ports
  • Four SATA ports capable of 3 Gb/s
  • Two USB 2.0 ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two RS-232/422/485 serial ports
  • 3.3 V GPIO signals

XMC/PrPMC Site

  • 32-bit, 33 MHz PCI bus (PMC interface)
  • x8 PCI Express Gen3-capable port (XMC interface)
  • One SATA port (XMC interface)
  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • IEEE 1588 support on one Gigabit Ethernet port
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks BSPs

Physical Characteristics

  • 3U cPCI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedisation levels (see the X-ES Ruggedisation Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Ordering information

Please contact Sarsen Technology to request a quote.