TOTAL: £0.00
home

email


Products

XCalibur1641


Overview

NXP QorIQ Eight-Core P4080 Processor-Based 6U VPX Module

The XCalibur1641 from Extreme Engineering (X-ES) is a high-performance 6U VPX single board computer supporting NXP QorIQ P3, P4, and P5 processors. The P4080 processor brings the raw power of eight e500mc cores running at up to 1.5 GHz and dual-channel DDR3 memory, delivering unparalleled multi-core performance.

Standard I/O for the XCalibur1641 includes four Gigabit Ethernet ports, up to five SATA 3.0 Gb/s ports, two USB 2.0 ports, and two RS-232/422/485 serial ports. Application-specific I/O is added easily via dual PMC/XMC sites with a PCI Express interface (x8) to each XMC site.

The XCalibur1641 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, Green Hills INTEGRITY-178 tuMP, QNX Neutrino, LynuxWorks LynxOS, and Linux is available.

 

Technical

  • NXP (formerly Freescale) QorIQ P4080 processor with eight Power Architecture® e500mc cores at up to 1.5 GHz
  • Alternate NXP QorIQ processors available: P3041, P4040, P5010, and P5020
  • 6U VPX module
  • Conduction or air cooling
  • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
  • 2 to 16 GB of dual-channel DDR3 ECC SDRAM at up to 1333 MHz
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of CPU NAND flash
  • x4 PCI Express lanes from CPU to switch
  • x8 PCI Express to XMC sites
  • Two x4 (x8 total) PCI Express lanes from switch to P1
  • Up to two SATA ports
  • XAUI to VPX P2
  • Two USB 2.0 ports
  • Four Gigabit Ethernet ports
  • Two RS-232/422/485 serial ports
  • Two XMC/PrPMC interfaces
  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY-178 tuMP BSP
  • QNX Neutrino BSP (contact factory)
  • LynuxWorks LynxOS BSP (contact factory)

Specifications

Processor

  • NXP (formerly Freescale) QorIQ P4080 processor
  • Eight Power Architecture® e500mc cores at up to 1.5 GHz
  • 128 kB L2 cache per core
  • 1 MB L3 cache per channel
  • IEEE 754 Floating-Point Unit (FPU) support

Alternate Processor Configurations

  • P3041 processor with four Power Architecture® e500mc cores at up to 1.5 GHz
  • P4040 processor with four Power Architecture® e500mc cores at up to 1.5 GHz
  • P5010 processor with one 64-bit Power Architecture® e5500 core at up to 2 GHz
  • P5020 processor with two 64-bit Power Architecture® e5500 cores at up to 2 GHz

Memory

  • 2 to 16 GB of dual-channel DDR3 ECC SDRAM at up to 1333 MHz
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of CPU NAND flash

VPX

  • VITA 46.0
  • VITA 46.11 (System Management on VPX)
  • VITA 46.4 (two x4 PCIe lanes to P1)
  • VITA 46.7 (two 1000BASE-TX and two 1000BASE-BX Ethernet ports to P4)
  • VITA 46.9 (PMC and XMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d)
  • One or two USB 2.0 ports to P6
  • XAUI to P2
  • Two SATA ports capable of 3 Gb/s to P2 (optional)

XMC/PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)
  • x8 PCI Express port to J15 and J25 (XMC)

Front Panel I/O (Optional)

  • Two RS-232 serial ports
  • One Gigabit Ethernet port
  • One USB 2.0 (optional)
  • General-purpose LEDs

IPMI

  • Onboard management controller
  • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • Greens Hills INTEGRITY-178 tuMP BSP
  • QNX Neutrino BSP (contact factory)
  • LynuxWorks LynxOS BSP (contact factory)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedisation levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Technical documents

Ordering information

Please contact Sarsen Technology to arrange a quote.

NEWS