TOTAL: £0.00





COMXpress Stratix® 10 SoC

The COMXpress Stratix® 10 SoC (System on Chip) from REFLEX CES is a COM Express Basic form factor Type 7 module featuring an Intel Stratix 10 FPGA.

Target markets include HPC & data analytics, networking acceleration, Intelligent vision & video processing.


FPGA and Configuration Modules

  • Stratix® 10 SX 2.8MLE with ARMV8 (Integrated quad-core 64 bit ARM CortexA53 hard processor system up to 1.5 GHz embedded)
  • MAX10 CPLD with board management control
  • JTAG connector for external USB cable
  • eMMC 32GBytes (HPS) / with U-boot, Linux kernel & Rootfs
  • NOR Flash for quad SPI (x4) FPGA configuration mode


  • 4 DDR4 memory banks on board:
    • 3x banks 16GB + ECC, x72bit (FPGA) Up to 2400MT/s
    • 1x bank 8GB + ECC, x72bit (either HPS or FPGA)

@2400MT/s (if HPS not used) or @1866MT/s (if HPS is used)

Communication Interfaces

  • Ethernet 10/100/1000 Base-T (HPS)
  • 4x 10GbE base KR (default)
  • 2x Serial SATA revision 3.0, 6Gb/s
  • 4x XCVR lane connected to extension connector (DisplayPort/SDI capable)
  • 3x USB2.0 HOST
  • 1x USB3.0
  • 1x SMB,I²C,UART
  • 8 GPIOs (4 FPGA + 4 HPS)
  • 2x PCI Express x16 (Gen 1, 2 or 3), root complex, end-point supported
  • eSPI interface multiplexed over Intel Low Pin Count (LPC) Interface
  • Network Controller Sideband Interface (NC-SI) supported (and optional)

Other resources

  • Extension connector : Interfaces (4x transceivers Rx/Tx and 4xLVDS interface)
  • Programmable PLL (Si5341), output clocks frequency 0.0001MHz to 750MHz
  • High precision on board oscillator, clock accuracy 20MHz-0.05ppm for Precision Time Protocol (PTP) IEEE 1588


  • +12V primary power supply input, 120W max
  • +5V standby and 3.3V RTC power supply inputs
  • Delivered with a custom heatsink

Operating Range : 0°C to 40°C

Storage temperature Range : 0°C to 70°C

Board Dimensions

  • Length : 125mm (4.92inches)
  • Width : 95mm (3.74 inches)
  • Height (without heatsink) :
    • 11.91mm (with 5mm Standoffs)
    • 14.91mm (with 8mm Standoffs)

Standards and compliance

  • RoHS/REACH compliant
  • UL certified
  • ISO9001 Facility


  • COM Express Basic form factor Module
  • Intel® Stratix® 10 SX Technology - 2.8MLE density
  • Designed for High Performance Computing and Acceleration
  • 32 PCI Express lanes, Type 7 standard
  • On board 56GB DDR4 + ECC
  • IO and Transceiver extension connector

Ordering information

COMXpressSXS10L-2800T - Intel® Stratix® 10 SoC «17G L-Tile» version (1SX280LN3F43E2VG)

Please contact Sarsen Technology to request a quote.