Products

• NXP QorIQ LS1023A processor with two 64-bit ARM A53 cores at up to 1.6 GHz
• NXP QorIQ LS1043A processor with four 64-bit ARM A53 cores at up to 1.6 GHz
• NXP QorIQ LS1048A processor with four 64-bit ARM A53 cores at up to 1.8 GHz
• NXP QorIQ LS1088A processor with eight 64-bit ARM A53 cores at up to 1.8 GHz
• 128-bit NEON SIMD engine per core
• Conduction cooling
• LS1088A: Up to 16 GB of DDR4-2100 ECC SDRAM
• LS1043A: Up to 8 GB of DDR4-1600 ECC SDRAM
• Up to 256 MB of NOR flash (with redundancy)
• Up to 16 GB of NAND flash
• LS1043A: x1 PCI Express Gen2 interface to P15
• LS1088A: x4 PCI Express Gen3 interface to P15
• Up to four 10/100/1000BASE-T Ethernet ports
• Up to two 10GBASE-KR Ethernet ports
• Up to two 1000BASE-X Ethernet ports
• Two RS-232/422/485 serial ports
• Two USB 2.0 ports
• One USB 3.0 port
• One SATA 6 Gb/s port (optional)
• Linux BSP
• Wind River VxWorks BSP
• Green Hills INTEGRITY BSP

Processor

• NXP QorIQ LS1043A processor with four 64-bit ARM Cortex-A53 cores at up to 1.6 GHz
• 128-bit NEON SIMD engine per core

Alternate Processors

• NXP QorIQ LS1023A processor with two 64-bit ARM A53 cores at up to 1.6 GHz
• NXP QorIQ LS1048A processor with four 64-bit ARM A53 cores at up to 1.8 GHz
• NXP QorIQ LS1088A processor with eight 64-bit ARM A53 cores at up to 1.8 GHz

Memory

• Up to 8 GB of DDR4-1600 ECC SDRAM (LS1043A)
• Up to 16 GB of DDR4-2100 ECC SDRAM (LS1088A)
• Up to 256 MB of NOR flash (with redundancy)
• Up to 16 GB of NAND flash

PrPMC Interface

• 66/33 MHz PCI
• 32-bit bus interface

PMC P14 I/O

• Two 10/100/1000BASE-T Ethernet ports
• Two RS-232/422/485 ports
• Two USB 2.0 ports
• 3.3 V GPIO

P15 XMC Interface

• LS1043A: x1 PCI Express Gen2 interface to P15
• LS1088A: x4 PCI Express Gen3 interface to P15

XMC P16 I/O

• Two RS-232/422/485 serial ports
• One USB 3.0 port
• One SATA port capable of 6 Gb/s (optional)
• Two 10/100/1000BASE-T Ethernet ports
• Two 1000BASE-X Ethernet ports (optional)
• Two 10GBASE-KR Ethernet ports (optional)

Software Support

• Linux BSP
• Wind River VxWorks BSP
• Green Hills INTEGRITY BSP
• QNX Neutrino BSP (contact factory)
• LynuxWorks LynxOS BSP (contact factory)

Physical Characteristics

• Conduction-cooled XMC/PMC form factor
• Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

• Supported ruggedisation levels (see the X-ES Ruggedization Chart): 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.