TOTAL: £0.00
home

email


Products

XpressVUP-LP5P


Overview

Xilinx Virtex Ultrascale+ VU5P FPGA Board

The XpressVUP-LP5P from REFLEX CES is a low-profile PCIe FPGA board based on the Xilinx Virtex Ultrascale+ VU5P FPGA. 

The board provides 2 banks of DDR4, 2 banks of QDR2+ memories and two QSFP28 cages for multi 10GbE/40GbE/100GbE networking solutions

Target Applications
High performance computing (HPC)
Finance / Low latency applications
Networking     

Technical

  • PCIe Gen3 x16
  • Xilinx Virtex UltraScale+ VU5P FPGA
  • On board two DDR4 and two QDR2+ independent banks
  • Two QSFP28 optical cage for multi networking solutions
  • PCIe endpoint with 16 lanes at 8 Gb/s link rate (Gen3)
  • Fail safe configuration flash sector
  • Tandem configuration mode available
  • JTAG connector

Features

  • "Turbo" version : VU5P speed grade -2; 2 bank DDR4 by 72bit of 8GBytes total @2666MT/s; 2 banks QDR2+Xtrem by 18bit of 72Mbit each @633MHz

Specifications

FPGA and Configuration Modules

  • Xilinx Virtex UltraScale+ 16nm FPGA
  • XCVU5P-L2FLVB2104E (Production)
  • 1,26 M System Logic Cells
  • 132 Mb UltraRAM (high-density, dual-port, synchronous memory block available in UltraScale+)
  • JTAG connector for external Xilinx USB cable
  • 2x Nor Flash for dual quad SPI (x8) configuration mode

Communication Interfaces

  • PCI Express x16 (Gen 1, 2 or 3)
  • 2 x QSFP28 quad optical cage (2 x 4 XCVR : 28 Gb/s per link)
  • 10 GbE/25GbE/50GbE/100GbE/2 x 100GbE networking interface
  • Other protocols supported by the QSFP28 modules

Memory

  • On board DDR4, 2x banks by 64 bits + 4 bits ECC, total 8GB
  • On board QDR-II+, 2x banks by 18 bits, total 144Mbits

Operating Range : 10°C to 45°C

Power

  • Max 100W
  • Delivered with a custom heatsink

Other resources

  • On board programmable PLL oscillator (Si5345), highly flexible and configurable clock generator.
  • On board high precision oscillator provides clock accurate 20MHz-0.05ppm for Precision Time Protocol (PTP) Ethernet, synchronisation protocol standardized IEEE 1588
  • One coax connector for PPS (pulse per second) that allows a synchronisation of multiple electronics parts

Board Dimensions

  • Length : 167.7mm (6.59inches)
  • Height : 68.9mm (2.71 inches) / Low Profile PCIe
  • Thickness : 1.57 mm (0.062 inches) / Standard Thickness PCIe

Standards and compliance

  • RoHS/REACH compliant
  • UL certified
  • ISO9001 Facility

Ordering information

Please contact Sarsen Technology to arrange a quote.

Associated products