Products

WABGM2 Chassis Manager

Overview

WILD Chassis Manager / System on Module

The WABGM2 Chassis Manager / System on Module from Annapolis Micro Systems is VITA 46.11 conformant and SOSA-aligned, with a MPSoC UltraScale+ FPGA (ZU11EG). It includes an optional 3rd connector which adds 1/10GBASE-T Ethernet, a second MIL-1553 Interface, and three additional Zynq PL HSS.

The Chassis Manager/SoM is optimized for use with VITA 65/SOSA profiles that define all payload I/O and support backplane Maintenance ports (MP01/MP02) as they provide interfaces to multiplex these and/or export over ethernet allowing for access via chassis manager ethernet connection.

An optional Board Support Package (BSP) is available for custom application development and for additional feature support.

Technical

General

SOSA-aligned VITA 46.11 Chassis Manager / System on Module
Xilinx UltraScale+ ZU11EG MPSoC running Linux for CHmC
- Processing Subsystem (PS)
  - Quad core A53 ARM running at 1.2 GHz
  - Dual core R5 ARM
  - 4GB DDR4 DRAM
  - 128MB QSPI NOR
- Programmable Logic subsystem (PL)
  - 633K System Logic cells in Programmable Logic
  - 2GB DDR4 DRAM
  - 22.5Mb of UltraRAM
  - 128MB QSPI NOR
  - Dual 128KB battery backed NV SRAM
MicroSemi Polarfire MPF200T for security functions
- 192K Logic Elements
- 13.3 Mb Internal RAM
- 297Kb internal uPROM bits
- Boots from internal flash
- SPI NOR for in system updates
Supports up to 16 slots for JTAG and Maintenance Port Aggregation/muxing
- Provides 4 sets of MP01/MP02 and 2 sets of JTAG with dedicated select lines for each for further muxing on backplane
Directly attaches to backplane or carrier card for slot connections
Uses backplane only interface for I/O functions

Chassis Support Functions

Up to 2 Fan SPD and 1 Fan PWM interface
Up to 3 remote temperature sensing interfaces
Remote LEDs/Status for OverTemperature, Fan Fail and Power OK
Optional security functions for keyfill and zeroize

Other External Connections

Optional MIL-1553 interface
RS-232 UART for Zynq PS console (PS UART)
RS-232 UART for Maintenance port multiplexing (PL UART)
Two 10/100/1000 BASE-T interfaces from Zynq PS
Supports multiple battery inputs (from backplane or cable)
Optional 3rd Connector adds:
- USB 2.0
- One 10/100/1000 BASE-T Ethernet
- 2nd MIL-1553 Interface
- Additional 10 LVDS
- Additional 4 ZYNQ PL HSS

Backplane Management Connections

16 Individual maskable resets/GPIO
PS Inhibit/Fail for VITA 62 supplies
4 Maintenance Port 1 interfaces (LVCMOS per SOSA)
4 Maintenance Port 2 interfaces (LVCMOS per SOSA)
Four 3.3V JTAG interfaces
AUXCLK/REFCLK input
20 ZYNQ PL GPIO (3.3V)
2 10Gbps capable HSS connections to Zynq PL HSS
Dual IPMI connections per VITA 46.11
GDISCRETE, NVMRO and SYSRESET outputs

Optional Board Support Package (BSP)

Zynq and Polarfire development support
Enables customization of Zynq PS, PL and Microsemi logic
Required for some security functions
Order separately using P/N S00000-89

Environmental and Mechanical

Only requires 3.3V for operation
- Designed to run from backplane 3.3VAUX
Optional support for -65C to 105C storage temperature
Optional support for -55C partial operation
Supports 3U and 6U backplanes
- Does not cover any VITA 66/67 openings allowing for full support
- Consumes 5 slots of backplane width

Ordering information

The WABGM0 is Annapolis-designed, and manufactured in USA.

Please request a quote using the orange button.

Associated products

WABGM0 Chassis Manager

Boards

Systems

Accessories

Format

Processor