XPedite5570

  • Overview
  • Features
  • Specifications
  • Ordering Information
Need help? Telephone 01672 511 166 ¦FPGA Computing, DSP, Embedded Data
Need help? Email for help on Embedded Computer Systems, Data Acquisition
Bookmark and Share

Overview

The Extreme Engineering Solutions (X-ES) XPedite5570 is a high-performance 3U VPX-REDI single board computer based on the Freescale P2020 QorIQ processor. With dual PowerPC e500 cores running at up to 1.2 GHz, the P2020 delivers enhanced performance and efficiency for demanding embedded computing applications such as airborne radar, battlefield sensor and electronic warfare.

Features

  • Freescale QorIQ P2020 processor with dual PowerPC e500 cores at up to 1.2 GHz
  • 3U VPX (VITA 46) module
  • Ruggedised Enhanced Design Implementation (REDI
  • Conduction or air cooling
  • Up to 8 GB DDR3-800 ECC SDRAM
  • Up to 256 MB of NOR flash (with redundancy
  • Up to 16 GB of NAND flash
  • PrPMC/XMC interface
  • x4 PCI Express P1.A fabric interconnect
  • x4 PCI Express P1.B fabric interconnect
  • Two SerDes Gigabit Ethernet P1 fabric interconnects
  • Two optional 10/100/1000BASE-T Ethernet ports
  • Up to two RS-232/RS-422/RS-485 serial P2 ports
  • One USB 2.0 port to P2
  • Front I/O available via plugover module
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Specifications

The Extreme Engineering Solutions (X-ES) XPedite5570 supports up to 8 GB of up to DDR3-800 ECC SDRAM, as well as up to 16 GB of NAND flash and up to 256 MB of NOR flash (with redundancy). The XPedite5570 provides a PCI Express interconnect, as well as two SerDes Gigabit Ethernet P1 fabric interconnects. The XPedite5570 also supports dual Gigabit Ethernet, GPIO, I²C, PMC I/O, XMC I/O, USB, and up to two RS-232/RS-422/RS-485 serial ports through the P2 connector.

The XPedite5570 is available as a 3U VPX-REDI conduction- or air-cooled form factor board. The typical power requirements are 15 W (1.2 GHz P2020 CPU at 85°C rail temperature) and 10 W (800 MHz P1020 CPU at 85°C rail temperature).

The XPedite5570 provides a ruggedised, high-performance, feature-rich solution to support the next generation of rugged embedded applications. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs) are available.

Ordering Information

Please contact Sarsen Technology for full details of the XPedite5570 options available.

Call for price

Telephone orders

Orderline: +44 1672 511166
XPedite5570

Place your mouse over this image

Manufacturer

Extreme Engineering Solutions

Model No
XPedite5570
  • Extreme Engineering Solutions

Bottom Panel Brands

  • Bittware
  • Danville Signal Processing
  • Conduant
  • XES
  • General Standards
  • Tech Source
  • Trenton Technology
  • Trenton Systems
  • VersaLogic
  • United Electronic Industries
Networking ¦ For Embedded Data Acquisition, Single Board Computing
Linkedin Logo ¦ For Sarsen Technologies ¦ Supplier of Embedded Systems
Follow Sarsen on Twitter for info on Embedded Computer Solutions

About Sarsen Technology

Sarsen Technology is a franchised distributor for BittWare, Conduant, Danville Signal Processing, Extreme Engineering Solutions (X-ES), General Standards, Tech Source, Trenton Systems, Trenton Technology, United Electronic Industries (UEI) and VersaLogic. We provide full local technical and commercial support for our clients and celebrated ten successful years in 2010.

© Sarsen Technology