Data Acquisition Boards
Our aim is to provide you with the high-resolution, ideal-speed hardware interface to get your real-time, real-world data into and out of the embedded computing environment.
General Standards Corporation develops and manufactures the highest-performance Analogue I/O, Digital I/O and Serial I/O products based upon a variety of buses such as PMC, PCI, PC/104-Plus, VME, and cPCI. Their extensive product line includes I/ O boards, cables, and software drivers. General Standards' high-performance bus interfaces have been clocked at the highest speeds in the industry - your interface to the real world in real time. As a leading supplier of interface cards, GSC offers unique ultra-fast, high-quality bus interfaces for Analogue I/O, Digital I/O, and Serial I/O applications.
Please visit www.generalstandards.com for full details of the General Standards Corporation hardware and software we supply and support.
VersaLogic designs & manufactures numerous analogue & digital I/O functions on the PC/104-Plus format.
From BittWare we can supply and support a range of high-speed PMC and PMC+ format analogue-to-digital converter boards. Sarsen Technology can also support the VITA 57 FPGA FMC Mezzanine I/O card standard for use with AMC and MicroTCA system hardware.
Extreme Engineering Solutions (X-ES) has a comprehensive range of serial communication cards supporting multiple ports and multiple communication protocols in 3U CompactPCI, 6U CompactPCI, PMC, PCI, and AMC form factors. All of X-ES's I/O cards utilize Freescale PowerQUICC II processors. Many of the cards support multiple SCC and SMC ports. Several of the cards support T1/E1/J1 ports for telecommunications applications.
Model No: PCIe-24DSI16WRC
The General Standards 24DSI16WRC is a wide-range 24-Bit, 16-Channel, 105KSPS analogue input module with 16 wide-range (high-level, low-level) delta-sigma input channels
Model No: DNA-CAN-503
The DNA-CAN-503 is a 4-port high-speed CAN interface for PowerDNA distributed automation and control system. This board (layer) is designed for communication with high-speed CAN devices up to 1 Mb/s. DNA-CAN-503 uses the Philips SJA1000 CAN Controller for advanced functionality such as listen-only, self-reception (echo), and advanced filtering modes and new transceivers for sleep/wakeup mode support.
Model No: CCPMC66-16AI32SSA
The General Standards CCPMC66-16AI32SSA is a conduction-Cooled, 32 differential channel, 16-Bit simultaneous sampling CCPMC format analog input board.
Model No: cPCI6U64-20AOF16C500KR
The General Standards cPCI6U64-20AOF16C500KR is a precision 20-Bit analog output product that provides 16 simultaneously clocked output channels in a 6U cPCI form factor. Outputs can be clocked at rates up to 500 KSPS per channel, and are supported by a 256K-Sample FIFO data buffer. Both continuous and burst clocking modes are supported, and voltage ranges are software-selectable as ±6V and ±3V, or optionally as ±10V and ±5V. Clocking and triggering rates can be derived from an internal rate generator, or from external clock and trigger sources to support the synchronous operation of multiple boards.
Bottom Panel Brands
About Sarsen Technology
Sarsen Technology is a franchised distributor for BittWare, Conduant, Danville Signal Processing, Extreme Engineering Solutions (X-ES), General Standards, Tech Source, Trenton Systems, Trenton Technology, United Electronic Industries (UEI) and VersaLogic. We provide full local technical and commercial support for our clients and celebrated ten successful years in 2010.