TOTAL: £0.00
home

email


Products

XCalibur4702


Overview

Intel® Xeon® D-1700 Air-Cooled 6U CompactPCI Module with 48 GB of DDR4 and SecureCOTS™

The XCalibur4702 from Extreme Engineering (X-ES) is a high-performance 6U CompactPCI single board computer based on the Intel® Xeon® D-1700 series (formerly Ice Lake-D) of processors.

The XCalibur4702 provides up to 48 GB of DDR4 ECC SDRAM in three separate channels, one XMC/PrPMC slot, and up to 32 GB of SLC NAND flash. The XCalibur4702 also hosts numerous I/O ports, including 10/100/1000BASE-T Ethernet, USB 2.0, and RS-232/422/485 serial ports through the backplane connectors.

For enhanced security, the XCalibur4702 integrates SecureCOTS™ technology with a Microsemi® PolarFire™ FPGA for hosting custom functions to protect data from being modified or observed.

Technical

  • Supports Intel® Xeon® D-1700 series (formerly Ice Lake-D) processors
  • Up to 10 Xeon®-class cores in a single, power-efficient SoC package
  • SKUs available with native extended temperature support
  • Designed with SecureCOTS™ technology to support enhanced security and trusted computing
  • Microsemi® PolarFire™ FPGA with 128 MB SPI flash
  • 6U CompactPCI module
  • Complies with PICMG 2.0, 2.3, 2.9, 2.16
  • Air cooling
  • 48 GB of DDR4 ECC SDRAM in three channels
  • 32 GB of SLC NAND flash
  • One XMC/PMC site with x8 PCIe Gen3 interface and rear I/O support
  • Seven 10/100/1000BASE-T Ethernet ports
  • Three USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • Wind River VxWorks BSP
  • X-ES Enterprise Linux (XEL) BSP
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs, as well as Microsoft Windows drivers

Specifications

Processor

  • Intel® Xeon® D-1700 series (formerly Ice Lake-D) processors
  • Up to 10 Xeon®-class cores in a single, power-efficient SoC package
  • SKUs available with native extended temperature support

Memory

  • 48 GB of DDR4 ECC SDRAM in three channels
  • 32 GB of SLC NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

Security and Management

  • Microsemi® PolarFire™ FPGA with 128 MB SPI flash
  • Designed with SecureCOTS™ technology to support enhanced security and trusted computing
  • System voltage monitor, power-on/reset control, non-volatile write-protection control
  • Trusted Platform Module (TPM)

cPCI

  • PICMG 2.3 (PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)

XMC (VITA 42.3)

  • x8 PCI Express Gen3-capable

Front Panel I/O

  • Five 10/100/1000BASE-T Ethernet ports
  • One USB 2.0 port
  • General-purpose LEDs
  • Two SFP+ cages

Rear Panel I/O

  • Two 10/100/1000BASE-T Ethernet ports
  • Two USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • 3.3 V GPIO signals
  • PMC I/O

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • IEEE 1588 support

Software Support

  • UEFI firmware
  • Wind River VxWorks BSP
  • X-ES Enterprise Linux (XEL) BSP
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs, as well as Microsoft Window drivers

Physical Characteristics

  • 6U CompactPCI air-cooled form factor
  • Dimensions: 233 mm x 160 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Technical documents

Ordering information

Please request a quote via the website.

Associated products