TOTAL: £0.00
home

email


Products

S10VG4


Overview

Intel Stratix 10 GX FPGA 3/4-Length PCIe Board on Viper Platform

The S10VG4 from BittWare is an Intel Stratix 10 FPGA-based PCIe card designed for the most demanding datacentre and high performance computing applications. With an incredible 9.2 trillion floating point operations per second (TFLOPS), 100G Ethernet, and 2.7M logic elements, this board sets new standards for FPGA performance.

The S10VG4 meets the significant thermal challenge posed by the power density of the FPGA with BittWare’s Viper platform, offering support for large FPGA loads, up to 32 GBytes of DDR4, and 4x100 Gbps Ethernet. OpenCL support enables a high-level software-like development flow, which greatly simplifies FPGA development.

Viper Platform for Thermal Performance
The S10VG4 is designed with BittWare’s Viper platform for thermal performance. The Viper platform uses advanced computer flow simulation to drive the physical board design in a thermals first approach, including the use of heat pipes, airflow channels, and arranging components to maximise the limited available airflow in a server. Viper boards are passive as standard, but active cooling is also available.

Technical

  • Intel Stratix 10 GX FPGA
  • PCIe x16 supporting Gen1, Gen2, or Gen3
  • Four QSFP cages for 4x 40/100GbE or 16x 10/25GbE
  • Up to 32 GBytes DDR4
  • UltraPort SlimSAS™ for serial expansion
  • Board Management Controller for Intelligent Platform
  • Management
  • FPGA examples and complete software support
  • OpenCL support

Specifications

Board Specifications

FPGA
  • Intel Stratix 10 GX 1SG280 FPGA
  • Up to 2.7 million logic elements
  • 32 transceivers @ 17Gbps
  • 5,760 DSP blocks
  • 4 PCIe hard IP blocks

Memory
  • Flash for FPGA images
  • 4x DIMM sites, each supporting:
  • DDR4: x72 w/ECC, up to 8 GBytes per SODIMM
  • Dual QDR x36, up to 576 Mbits per SODIMM

PCIe Interface
  • x16 PCIe Gen1, Gen2, Gen3

Utility & Debug
  • USB, PPS, and 1 GbE
  • Built-in Altera USB-Blaster

QSFP Cages
  • 4 QSFP28 (zQSFP) cages on front panel connected directly to FPGA via 16 transceivers
  • Each supports 40/100GbE or 4x 10/25GbE

UltraPort SlimSAS
  • Standard high-speed connector for storage devices
  • Connected to FPGA via 8x transceivers
  • Can support an additional x16 or x8 PCIe interface (requires second slot)

Board Management Controller
  • Voltage, current, temperature monitoring
  • Power sequencing and reset
  • Field upgrades
  • FPGA configuration and control
  • Clock configuration
  • I2C bus access
  • USB 2.0 and JTAG access
  • Voltage overrides

Size
  • 3/4-length, standard-height PCIe slot card
  • 241mm x 111.15mm
  • Max. component height: 14.47mm

Development Tools

System Development
  • BittWorks II Toolkit - host, command, and debug tools for BittWare hardware; Matlab API

FPGA HDL Development
  • FPGA Development Kit - Example Quartus projects
  • Intel tools - Quartus II software

Technical documents

Ordering information

This is a newly announced board. Please contact Sarsen Technology for more information.

Software