TOTAL: £0.00
home

email


Products

SIO4BXR


Overview

Four Channel High Performance Serial I/O PMC Card

The SIO4BXR board from General Standards is a four channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability for PMC applications with Rear I/O. The SIO4BXR combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels.

The PMC66-SIO4BXR can also be supplied pre-installed on a PCIe carrier board.
 

Technical

  • Four Independent Multi-Protocol Serial Channels
  • Serial Mode Protocols include Asynchronous, Monosync, Bisync, SDLC, HDLC, Nine-Bit, and IEEE 802.3
  • Synchronous Serial Data Rates up to 10Mbps
  • Asynchronous Serial Data Rates up to 1Mbps
  • Independent Transmit and Receive FIFOs for each channel - Up to 32K byte each
  • Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, and RS530
  • Parity and CRC detection capability
  • Programmable Oscillators provide flexibility for Baud Rate Clock generation
  • PMC Rear IO Connection
  • SCSI type 68 pin front edge I/O Connector
  • Eight signals per channel, configurable as DTE or DCE: 3 Serial Clocks (TxC,RxC,AuxC), 2 Serial Data signals (TxD,RxD), CTS, RTS, DCD
  • Unused signals may be reconfigured as General Purpose IO
  • Fast RS422/RS485 Differential Cable Transceivers Provide Data Rates up to 10Mbps
  • RS423 and RS232 Cable Transceivers Provide Data Rates up to 230kbps
  • Industry Standard Zilog Z16C30 Multi-Protocol Universal Serial Controllers (USC®)
  • Standard Cable to four DB25 connectors and Custom Cables available
  • Available drivers include VxWorks, WinNT, Win2k, WinXP, Linux, and Labview
  • Industrial Temperature Option Available
  • May be mounted on various adapters to fit PCI, PCIe, PXI, and cPCI form factors

Specifications

Power Requirements (@25 C):
+5VDC ±0.2 VDC at 1.5 Amps Max(typical 1.0 Amps)
+12VDC ±0.2 VDC at 0.03 Amps Max(typical 0.02 Amps)
Typical Total Power Dissipation: ~5.25W
PMC Compatibility:
32bit / 66MHz PCI r2.2 Compliant
Direct master DMA transfer
Provides a single multifunction interrupt (INTA)
3.3V IO / 5V tolerant PCI bus interface
Physical Characteristics:
Conforms to PMC Mezzanine Specification
Length: 149 mm
Width: 74 mm
Environmental Specifications:
Ambient Temperature Range:
Operating: 0 to +70 C (Commercial Option)
-40 to +85 C (Industrial Option)
Storage: -40 to +85C
Relative Humidity: Operating: 0 to 80%, non-condensing
Storage: 0 to 95%, non-condensing
Altitude: Operation to 10,000 ft
Cooling Requirements:
Conventional air-cooling, 200 LPFM (typical mezzanine environment)

Technical documents

Ordering information

Part number configuration: PMC66 – SIO4BXR - (FIFO Size) - (Temperature)

Option  Valid Selections  Description 
 FIFO Size  48KLC  (software selectable)
4K byte Tx / 8K byte Rx FIFO
or 8K byte Tx / 4K byte Rx FIFO 
64K  (software selectable)
8K byte Tx / 16K byte Rx FIFO
or 16K byte Tx / 8K byte Rx FIFO 
256K   32K byte Tx / 32K byte Rx FIFO 
Temperature  (blank)  0oC to +70oC – Commercial (Standard)
I -40oC to +85oC – Industrial

Please contact Sarsen Technology for full pricing and availability details.

NEWS