• MIL-STD-704 28 VDC input voltage
• MIL-STD-461E/F EMI filtering
• VITA 62.0-compliant power supply
• Up to 300 W output on 3.3 V, 5 V, and ±12 V
• On-card holdup capacitor for up to 40 ms (120 W symmetrical load distribution) of holdup time (optional)
• Up to 90% efficient
• -40°C to 85°C conduction-cooled operating temperature (at the thermal interface)
• Compliant with the VITA 48.2 Type 1, Two-Level Maintenance (2LM) standard
• VITA 46.11 Tier 1 and Tier 2 IPMI controller for on-card voltage monitoring

Input Power
    MIL-STD-704 28 VDC (22 to 29 V)
    MIL-STD-461E/F EMI filtering
 
Output Power
    Up to 90% efficient
    Supports up to 300 W in total combined power output
    3.3 V at up to 20 A (limited by the connector)
    5 V at up to 22 A
    12 V at up to 8.3 A
    3.3 V auxiliary at up to 1 A
    ±12 V auxiliary at up to 1.5 A
 
Holdup
    On-card holdup capacitor for up to 40 ms (120 W symmetrical load distribution) of holdup time (optional)
 
Physical Characteristics
Contact X-ES for CAD model if desired
    3U VPX form factor
    0.8 in. or 1.0 in pitch
    1.46 pounds (with on-card holdup capacitor)
    1.27 pounds (without on-card holdup capacitor)
 
IPMI Controller
    VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
    Monitors voltages
    Monitors temperature sensors
    Connects to backplane via Intelligent Platform Management Bus (IPMB)
 
Environmental Requirements
Contact X-ES for appropriate board configuration based on environmental requirements.
    Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
    Conformal coating available as an ordering option
 

There are a range of options available. Please contact Sarsen to discuss your project requirements.