TOTAL: £0.00
home

email


Products

18AI32SSC1M


Overview

18-Bit, 32-Channel, Differential, 1.0 MSPS, Simultaneous Sampling PMC Analog Input Board

The PMC66-18AI32SSC1M analog input board from General Standards samples and digitises up to 32 input channels simultaneously at rates up to 1,000,000 samples per second for each channel.

The board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC/104-Plus via an adapter, and is functionally compatible with the IEEE PCI local bus specification Revision 2.3. System connections are made through a high-density front-panel I/O connector. Power requirements consist of +5 VDC in compliance with the PCI specification, and operation over the specified temperature range is achieved with standard convection cooling.

Typical Applications
High-Accuracy Analog Inputs
Industrial Robotics
Acoustic Sensor Arrays
Analog Event Capture
Biometric Signal Analysis
Dynamic Test Systems

Technical

  • 32 Differential Analog Inputs with dedicated 1.0MSPS SAR 18-Bit ADC per channel; Exceptional combination of precision, throughput and channel density on PMC
  • Simultaneous Sampling of all inputs; minimum data skew
  • Sampling rates from zero to 1.0 MSPS per channel (32 MSPS aggregate rate)
  • True Differential inputs minimise input noise and system interference
  • Input ranges: +/-10V, +/-5V, +/-2.5V software-selectable
  • 256 K-Sample FIFO data buffer
  • SAR (successive approximation) ADCs provide true simultaneous sampling without a minimum sample rate limitation
  • D32; 66MHz/33MHz PCI compatibility, with universal 5V/3.3V signaling
  • 2-Channel DMA engine supports both block and demand mode DMA transactions
  • Sampling controlled by an internal rate generator, by a software trigger, or externally
  • Continuous, burst and single-sample clocking modes
  • Hardware sync I/O for multiboard operation through both front-panel and internal ports
  • On-Demand internal autocalibration of all channels
  • Completely software-configurable; No field jumpers
  • Single-width PMC form factor with integral EMI shield
  • Available also with 16-Bit resolution at reduced cost

Specifications

Input Characteristics  
Configuration  32 differential analog input channels. Also available with 4, 8 or 16 channels.
Voltage Ranges  Software configurable as ±10V or ±5V fullscale. Optionally ±2.5V or ±1.25V.
Input Impedance  2.0 Megohms typical, line-line. 1 Megohm line-ground..
Bias Current  100 nA maximum
Common Mode Rejection  60dB typical, DC-50kHz
Maximum Input Voltage  ±11V relative to input return, for rated performance. ±6V for the Low-range option.
Crosstalk Rejection  85dB typical, DC-100kHz
Input Noise  0.3mVRMS for native 18-Bit configuration; 0.4mVRMS for the 16-Bit configuration;
Typical on all ranges.
Overvoltage Protection  ±30 Volts with power applied; ±15V with power removed.
   
Transfer Characteristics  
Sample Rate Range  Zero to 1,000,000 samples per second; all channels simultaneously
Channels per Sample  1-32.
Input Bandwidth (-3dB)  DC to 800 kHz typical.

Technical documents

Ordering information

Please contact Sarsen Technology for pricing and availability of other form factors, such as XMC, CCPMC etc.
 
Basic Model Number  Form Factor 
PMC66-18AI32SSC1M  PMC, Single-width
PCI66-18AI32SSC1M  PCI, short length
cPCI66-18AI32SSC1M  cPCI, 3U
PC104P66-18AI32SSC1M  PC104-Plus
PCIe66-18AI32SSC1M  PCI Express
PCIe10466-18AI32SSC1M  PCIe, one-lane on PC/104 form factor