TOTAL: £0.00
home

email


Products

XCalibur4702


Overview

Intel® Xeon® D-1700 Air-Cooled 6U CompactPCI Module with 48 GB of DDR4 and SecureCOTS™

The XCalibur4702 from Extreme Engineering (X-ES) is a high-performance 6U CompactPCI single board computer based on the Intel® Xeon® D-1700 series (formerly Ice Lake-D) of processors.

The XCalibur4702 integrates SecureCOTS™ technology with a Microsemi® PolarFire™ SoC FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required.
 
The XCalibur4702 provides up to 48 GB of DDR4 ECC SDRAM in three separate channels, one XMC/PrPMC slot, and up to 32 GB of SLC NAND flash. The XCalibur4702 also hosts numerous I/O ports, including 10/100/1000BASE-T Ethernet, USB 2.0, PCI, and RS-232/422/485 serial ports through the backplane connectors.
 
Wind River VxWorks and X-ES Enterprise Linux (XEL) Board Support Packages (BSPs) are available.

Technical

Processor
  • Intel® Xeon® D-1700 series (formerly Ice Lake-D) processors
  • SKUs available with native extended temperature support
 
Memory
  • 48 GB of DDR4 ECC SDRAM in three channels
  • 32 GB of SLC NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM
 
Security and Management
  • Microsemi® PolarFire™ SoC FPGA with 256 MB SPI flash
  • Designed with SecureCOTS™ technology to support enhanced security and trusted computing
  • System voltage monitor, power-on/reset control, non-volatile write-protection control
  • Trusted Platform Module (TPM)
 
Additional Features
  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • 33/66 MHz 32-bit PCI interface to J1 and J2
  • PICMG 2.3 (PMC I/O to J3)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
 
XMC (VITA 42.3)
  • x8 PCI Express Gen3-capable
 
Front Panel I/O
  • Five 10/100/1000BASE-T Ethernet ports
  • One USB 2.0 port
  • General-purpose LEDs
  • Two SFP+ cages
 
Rear Panel I/O
  • Two 10/100/1000BASE-T Ethernet ports
  • Two USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • 3.3 V GPIO signals
  • PMC I/O
 
Software Support
  • UEFI firmware
  • Wind River VxWorks BSP
  • X-ES Enterprise Linux (XEL) BSP
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs, as well as Microsoft Window drivers
 
Physical Characteristics
  • 6U CompactPCI air-cooled form factor
  • Dimensions: 233 mm x 160 mm

Specifications

  • Supports Intel® Xeon® D-1700 series (formerly Ice Lake-D) processors
  • SKUs available with native extended temperature support
  • Designed with SecureCOTS™ technology to support enhanced security and trusted computing
  • Microsemi® PolarFire™ SoC FPGA with 256 MB SPI flash
  • 6U CompactPCI module
  • Complies with PICMG 2.0, 2.3, 2.9, 2.16
  • Air cooling
  • 48 GB of DDR4 ECC SDRAM in three channels
  • 32 GB of SLC NAND flash
  • One XMC/PMC site with x8 PCIe Gen3 interface and rear I/O support
  • Seven 10/100/1000BASE-T Ethernet ports
  • Three USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • Wind River VxWorks BSP
  • X-ES Enterprise Linux (XEL) BSP
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs, as well as Microsoft Windows drivers

Technical documents

Ordering information

There are a range of options available. Please contact Sarsen to discuss your project requirements

Associated products