TOTAL: £0.00
home

email


Products

XPedite6401


Overview

NXP QorIQ LS1043A ARM Processor-Based Conduction-Cooled XMC/PrPMC Mezzanine Module

The XPedite6401 from Extreme Engineering (X-ES) is an XMC/PrPMC mezzanine module that supports an NXP QorIQ LS1043A processor with four 64-bit ARM Cortex-A53 cores operating at up to 1.6 GHz.

The LS10xxA processor family delivers excellent networking performance and flexible I/O options in a single System-on-Chip (SoC) design, making it the logical choice for Small Form Factor (SFF) networking and rugged industrial embedded computing applications.

Technical

  • NXP QorIQ LS1023A processor with two 64-bit ARM A53 cores at up to 1.6 GHz
  • NXP QorIQ LS1043A processor with four 64-bit ARM A53 cores at up to 1.6 GHz
  • NXP QorIQ LS1048A processor with four 64-bit ARM A53 cores at up to 1.8 GHz
  • NXP QorIQ LS1088A processor with eight 64-bit ARM A53 cores at up to 1.8 GHz
  • 128-bit NEON SIMD engine per core
  • Conduction cooling
  • LS1088A: Up to 16 GB of DDR4-2100 ECC SDRAM
  • LS1043A: Up to 8 GB of DDR4-1600 ECC SDRAM
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 16 GB of NAND flash
  • LS1043A: x1 PCI Express Gen2 interface to P15
  • LS1088A: x4 PCI Express Gen3 interface to P15
  • Up to four 10/100/1000BASE-T Ethernet ports
  • Up to two 10GBASE-KR Ethernet ports
  • Up to two 1000BASE-X Ethernet ports
  • Two RS-232/422/485 serial ports
  • Two USB 2.0 ports
  • One USB 3.0 port
  • One SATA 6 Gb/s port (optional)
  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY BSP

Specifications

Processor

  • NXP QorIQ LS1043A processor with four 64-bit ARM Cortex-A53 cores at up to 1.6 GHz
  • 128-bit NEON SIMD engine per core

Alternate Processors

  • NXP QorIQ LS1023A processor with two 64-bit ARM A53 cores at up to 1.6 GHz
  • NXP QorIQ LS1048A processor with four 64-bit ARM A53 cores at up to 1.8 GHz
  • NXP QorIQ LS1088A processor with eight 64-bit ARM A53 cores at up to 1.8 GHz

Memory

  • Up to 8 GB of DDR4-1600 ECC SDRAM (LS1043A)
  • Up to 16 GB of DDR4-2100 ECC SDRAM (LS1088A)
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 16 GB of NAND flash

PrPMC Interface

  • 66/33 MHz PCI
  • 32-bit bus interface

PMC P14 I/O

  • Two 10/100/1000BASE-T Ethernet ports
  • Two RS-232/422/485 ports
  • Two USB 2.0 ports
  • 3.3 V GPIO

P15 XMC Interface

  • LS1043A: x1 PCI Express Gen2 interface to P15
  • LS1088A: x4 PCI Express Gen3 interface to P15

XMC P16 I/O

  • Two RS-232/422/485 serial ports
  • One USB 3.0 port
  • One SATA port capable of 6 Gb/s (optional)
  • Two 10/100/1000BASE-T Ethernet ports
  • Two 1000BASE-X Ethernet ports (optional)
  • Two 10GBASE-KR Ethernet ports (optional)

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY BSP
  • QNX Neutrino BSP (contact factory)
  • LynuxWorks LynxOS BSP (contact factory)

Physical Characteristics

  • Conduction-cooled XMC/PMC form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.
  • Supported ruggedisation levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Technical documents

Ordering information

Please contact Sarsen Technology to discuss your ideal configuration.

NEWS