TOTAL: £0.00
home

email


Products

XPedite6101


Overview

NXP T2081, T1042, or T1022 Processor-Based Conduction-Cooled XMC/PrPMC Mezzanine Module

The XPedite6101 from Extreme Engineering Solutions (X-ES) provides a compact, versatile, and cost-effective rugged computing solution, supporting multiple processor configurations and up to 8 GB of DDR3 ECC SDRAM. It also supports a number of high-performance I/O options with a Gen2 PCI Express interface to P15, as well as dual Gigabit Ethernet, USB 2.0, and SATA 3.0 Gb/s interfaces to P16.


Technical

  • NXP T2081 processor with eight virtual Power Architecture® e6500 cores at up to 1.8 GHz
  • NXP T1042 processor with four Power Architecture® e5500 cores at up to 1.4 GHz
  • NXP T1022 processor with two Power Architecture® e5500 cores at up to 1.4 GHz
  • 128-bit SIMD AltiVec engine per e6500 core
  • Conduction-cooled
  • Up to 8 GB of up to DDR3-1600 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of NAND flash
  • x4 PCI Express Gen2 interface to P15
  • PrPMC PCI interface
  • Two Gigabit Ethernet ports
  • Two RS-232/422/485 serial ports
  • Two USB 2.0 ports
  • Two SATA ports
  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY BSP

Specifications

Processor

- NXP T2081 processor with eight virtual (four dual-threaded) Power Architecture® e6500 cores at up to 1.8 GHz
- 128-bit SIMD AltiVec engine per e6500 core
- NXP T1042 processor with four Power Architecture® e5500 cores at up to 1.4 GHz
- NXP T1022 processor with two Power Architecture® e5500 cores at up to 1.4 GHz
- IEEE 754 Floating-Point Unit support
 

Memory

- Up to 8 GB of up to DDR3-1600 ECC SDRAM
- Up to 512 MB of NOR flash (with redundancy)
- Up to 32 GB of NAND flash
 

PrPMC Interface

- 66/33 MHz PCI
- 32-bit bus interface
 

P15 XMC Interface

- x4 PCI Express Gen2
 

PMC P14 I/O

- Two 10/100/1000BASE-T Ethernet ports
- Two RS-232/422/485 ports
- Two USB 2.0 ports
- 3.3 V GPIO
 

XMC P16 I/O

- Two SATA ports capable of 3 Gb/s
 

Software Support

- Linux BSP
- Wind River VxWorks BSP
- Green Hills INTEGRITY BSP
- QNX Neutrino BSP (contact factory)
- LynuxWorks LynxOS BSP (contact factory)
 

Physical Characteristics

- Conduction-cooled XMC/PMC form factor
- Dimensions: 149 mm x 74 mm, 10 mm stacking height

Technical documents

Ordering information

There are a number of configurations available. Please contact Sarsen Technology to discuss your application.

NEWS