TOTAL: £0.00
home

email


Products

WP3E10


Overview

SOSA-Aligned WILDSTAR 3U OpenVPX Switch

The WILDSTAR 3E10 3U OpenVPX Switch from Annapolis Micro Systems is a rugged, SOSA-aligned 3U VPX board that provides switching between backplane slots of multiple channels of 100Gb Ethernet. It also has front panel I/O which can be used to connect the system to external data sources.

This high-performance Switch is readily integrated into a vendor-neutral 3U VPX system, or deployed within Annapolis' proven WILD100 EcoSystem for 3U OpenVPX. The rugged board is available in industrial temperature grades, via air, conduction or air-flow-through (AFT) cooling. It is VITA 65-compliant, and aligns with the CMOSS and SOSA™ Technical Standard.

Technical

General Features

  • Separate Data and Control plane switches and control processors
  • Developed in alignment with the SOSA™ Technical Standard and CMOSS C4ISR/Electronic Warfare Modular Open Suite of Standards
  • Up to ten 40/100Gb and eight 1/10/25Gb Ethernet ports
    • 4x Data Plane backplane ports can be split into four 1x ports
  • Supports encrypted secure communication utilizing two Zynq UltraScale+ processors

40/100Gb Ethernet Data Plane Switch

  • Supports 10/25/40/100Gb Ethernet to backplane
  • Supports 1/10/25/40/50 and 100Gb Ethernet to optical interfaces
  • Based on Mellanox Spectrum Switch silicon
  • Industry leading, true cut through latency
  • Optimized for Software Defined Networking
    • Support for OpenFlow Switch Specification Version 1.0 to 1.4 and beyond
    • Remote configurable routing table
  • 6.4Tb/s switching capacity delivering wire speed performance at all packet sizes and traffic patterns
  • Dynamically shared, flexible packet buffering
  • Overlay and tunneling support including VXLAN, NVGRE, Geneve and MPLS
  • Data Center Bridging (DCB)
    • PFC, DCBX, ETS

1/10/25/40/100Gb Ethernet Control Plane Switch

  • Supports 1/10/25Gb Ethernet to backplane
  • Supports 1/10/25/40/50 and 100Gb Ethernet to optional front panel optical interfaces
  • Based on Marvell Prestera-DX Switch silicon
  • Layer-2 Wire-Speed Switching Engine
    • IEEE 802.1Q-compliant bridging
    • Large Forwarding Database (FDB) providing exact-match lookup for MAC entries, IGMPv3/MLDv2 IP Multicast, FCoE entries, and Router Host entries
    • Learning and forwarding based virtual ports (ePorts) and virtual bridge domains (eVLANs) for L2/VSI overlay services
    • L2 ECMP and Link Aggregation Groups (LAGs) for load sharing and fast failover
    • IEEE 802.1w (RSTP) and 802.1s (MSTP)
  • Virtual Overlay Network supporting NVGRE, VXLAN-GPE, GENEVE, SPB, and 802.1BR port extender
  • Supports two-step and one-step Transparent Mode Precision Time Protocol (PTP) per IEEE 1588v2 standard
  • Optional cut through mode

Two XILINX® Zynq® UltraScale+™ MPSOC Motherboard Controller (XCZU5EG)

  • Quad-core 64-bit ARM® Cortex-A53 running up to 1.2GHz
  • Dual-core 32-bit Cortex-R5 real-time processor running up to 533MHz
  • 16nm FinFET+ programmable logic
  • 2 GB 32-bit DDR4 memory running up to 1200MHz
  • Multiple levels of hardware and software security

Optional Board Support Package (BSP)

  • Enables user customization of Zynq+ design
  • Includes HDL reference design for HPEs and PetaLinux project including necessary software source
  • Includes Ubuntu Linux v18.04 file system and v5.4 kernel with required patches
  • Requires Xilinx 2020.2 tools
  • Order separately using P/N S00000-1G

Optional Front Panel I/O

  • Individual USB UART for Control and Data Plane processors
  • Optional Individual 1/10GbE for Control and Data Plane processors
    • HPE ethernet connections can be optionally bridged in software through HPE to Switch to provide additional uplink
  • Two or Three Data Plane 1/10/25/40/50/100Gb Ethernet optical connections
  • GPIO connector supporting RS232/RS485 interface plus 2 GPIO per HPE
    • Can be used for key fill interface
  • One Control Plane 1/10/25/40/100Gb
  • Status LEDs

System Management

  • OpenFlow compatible to support Software Defined Networking (SDN) solutions
    • Supports up to OpenFlow 1.5
  • System Management using Intelligent Platform Management Interface (IPMI)
  • Diagnostic monitoring and configuration
  • Current, Voltage and Temperature Monitoring Sensors

Mechanical and Environmental

  • 3U OpenVPX (VITA 65) Compliant 1.0″ spacing
  • Supports new SOSA/VITA 65 switch profile SLT3-SWH-6F1U7U-14.4.14 and SLT3-SWH-6F8U-14.4.15
  • Integrated Heat Sink and Board Stiffener
  • Available in Industrial Temperature Grades
  • Air, Air-Flow-Through or Conduction Cooled
  • Only requires +12V and +3.3VAUX from backplane
  • RT3 backplane connectors for 100G support

Specifications

 

Ordering information

Please request a quote via the orange button.

NEWS

Associated products