TOTAL: £0.00
home

email


Products

WB3XB9


Overview

SOSA Aligned 3U VPX Xilinx Virtex UltraScale+ 100GbE FPGA Board

The WILDSTAR 3XB9 from Annapolis Micro Systems is a processing powerhouse. Choose from one of four available Virtex UltraScale+ FPGAs, up to the brawny XCVU13P. The 3XB9 is 100GbE-enabled, SOSA-aligned, and highly rugged and thermally-controlled.

These FPGA boards include 1 Virtex® UltraScale+™ XCVU5P/XCVU7P/XCVU9P/XCVU13P FPGA with GTH/GTY transceivers performing up to 32.75 Gbps. There are two 80-bit DDR4 DRAM ports running up to 2400 MT/s.

If front panel and/or backplane IO is required, Annapolis offers extraordinary density, bandwidth and analog conversion choices. Each card has one WILD FMC+ (WFMC+) next generation IO site based on FMC/FMC+ specification. While accepting standard FMC and FMC+ cards (complies to FMC/FMC+ specification) it also allows larger form factor Annapolis WFMC+ cards for higher IO density. WFMC+ also supports additional LVDS IO (100) for higher density ADC and DAC solutions as well as stacking (2 IO cards per site) when at least one card is WFMC+. WFMC+ also brings the total available HSS up to 32 lanes for even more IO bandwidth. VITA 66/67 optical/RF backplane support is included.

There is also an on-board quad ARM CPU running up to 1.2 GHz which can be used for local application requirements. It is accessible over backplane PCIe or Ethernet and provides dedicated AXI interfaces to all FPGAs. It is also used to query board health like FPGA temperature and power. It is connected to the OpenVPX control plane via 1GbE.

The 3XB9 is hot swappable, allowing for more system reliability. This feature is unique to Annapolis.

Specifications

General Features

  • One Virtex® Ultrascale+™ XCVU5P, XCVU7P, XCVU9P, or XCVU13P FPGA
    • Up to 12,288 DSP Slices and 3,780,000 logic cells
    • Up to 360 Mb of High Bandwidth, Low Latency UltraRAM
    • GTH/GTY transceivers operating up to 32.75 Gb/s
    • Two 32-bit DDR4 DRAM ports running up to 2400 MT/s
  • One Xilinx® Zynq® UltraScale+™ MPSoC EV Motherboard Controller (XCZU7EV)
    • Quad-core 64-bit ARM® Cortex-A53 running up to 1.2GHz
    • Dual-core 32-bit Cortex-R5 real-time processor running up to 533MHz
    • 1728 DSP Slices, 504,000 logic cells and 27Mb of UltraRAM
    • Board support enabling user customization of ZYNQ+ design
    • Multiple levels of hardware and software security
  • VITA 46.11/SOSA IPMC Support

Front Panel And/Or Backplane I/O

  • WILD FMC+ (WFMC+) next generation IO site based on FMC+ specification
    • Accepts standard FMC and FMC+ cards (complies to FMC+ specification)
    • Allows larger form factor Annapolis cards for higher IO density
    • Supports additional LVDS IO for higher density ADC and DAC solutions
    • Up to 32 High Speed Serial and 100 LVDS connections to FPGA
  • Backplane optical and RF support with VITA 66/67
  • HSS connections can support protocols such as 10/40/100 Gb Ethernet and Aurora or user designed protocols. Some HSS interfaces also support PCIe using FPGA hard blocks

Mechanical and Environmental

  • 3U OpenVPX (VITA 65) Compliant, 1” VITA 48.1 spacing
  • Supports OpenVPX payload profiles such as:
    • SLT3-PAY-1F1U1S1S1U1U2F1H-14.6.11-n (SOSA Primary)
    • SLT3-PAY-1F1U1S1S1U1U4F1J-14.6.13-n (SOSA Secondary)
  • Available with 85°C ambient air temperature or card edge support and –55°C power-on
  • Available with -65°C to 105°C storage temperature
  • Air, Air-Flow-Through or Conduction Cooled
  • Only requires +12V and +3.3VAUX from backplane
  • Developed in alignment with the SOSA™ Technical Standard
  • RT3 backplane connectors for 100G support

Application Development

  • Open Project Builder Application Design Suite
    • Full Board Support Package for Fast and Easy Application Development
    • Computational, DSP and Data Flow Control Cores (FFTs, FIR, Math, etc)
    • Develop in GUI environment or create VHDL and use HDL environment
    • Built-in Debugger for Hardware in the loop Debugging
    • Supports High-Level Synthesis (HLS) Design Flow
  • VHDL BSP packages including full synthesis and simulation support
  • Communication Cores Included (10/40Gb Ethernet and AnnapMicro Protocol cores)
  • IOPE JTAG Access through RTM or Ethernet
  • Board control and status monitoring can be local and/or remote (via Ethernet)

Ordering information

There are a number of configurations available. Please contact Sarsen Technology to dicuss the options best suited to your application.

NEWS

Associated products