TOTAL: £0.00
home

email


Products

XPand6211


Overview

Rugged Small Form Factor (SFF) COTS 24-Port Gigabit Ethernet Switch and Router with Cisco IOS®, and General-Purpose Processor Module

The XPand6211 from Extreme Engineering is a Commercial-Off-The-Shelf (COTS) Rugged 24-port Gigabit Ethernet switch and router with a compact design that maximises processing and networking performance while optimising SWaP.

It provides a small form factor (SFF) alternative to traditionally larger slot-based systems; it is based on two COTS XChange3013 3U VPX Gigabit Ethernet switches.

The XPedite5205 Cisco IOS® Router XMC module can be installed on the XChange3013 to provide highly secure data, voice, and video communications to stationary and mobile network nodes. The XChange3013 optionally supports compliance with the VICTORY specification as an Infrastructure Switch and Router.

Technical

  • 21 10/100/1000BASE-T Gigabit Ethernet managed switch ports
  • Three 10/100/1000BASE-T Gigabit Ethernet router ports
  • One 10/100/1000BASE-T Gigabit Ethernet SBC port
  • Includes one XPedite8103 Intel® Atom™ E3800 family processor-based XMC/PMC module with up to 32 GB of Solid-State Storage and 8 GB of RAM
  • Includes two XChange3013 Gigabit Ethernet switches with Layer 2/3 management
  • Includes one XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router
  • XPedite5205 is NIST FIPS 140-2 Overall Level 1 validated on certificate #2242 and NIAP Common Criteria Certified
  • Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support (optional)
  • VICTORY Infrastructure Switch and Router support (optional)
  • Small Form Factor (SFF) sub-½ ATR system
  • Conduction- or convection- cooled chassis
  • Integrated 28 VDC power supply
  • MIL-STD-461E/F, MIL-STD-810, MIL-STD-704F qualified
  • Environmentally sealed
  • Circular connector support

Specifications

Physical Characteristics

  • Chassis dimensions and weight are dependent on configuration, contact Sarsen Technology for assistance

Ethernet Management Features (Optional)

  • Layer 2 switching and Layer 3 routing
  • Extensive IEEE protocol and IETF RFC support
  • Configuration through CLI or SNMP
  • 196 MB packet buffer
  • VICTORY Infrastructure Switch and Router support
  • XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router XMC

Ethernet Switch Features

  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Non-blocking, full wire-speed
  • IEEE 1588v2 and SyncE support (optional)

First Slot I/O (XChange3013 and XPedite8103)

  • 11 10/100/1000BASE-T Gigabit Ethernet ports from the XChange3013 3U VPX Gigabit Ethernet switch to J2
  • One 10/100/1000BASE-T Gigabit Ethernet port from the XPedite8103 XMC/PMC processor module to J2
  • One USB 2.0 port from the XPedite8103 to J2
  • One RS-232 port from the XPedite8103 to J2
  • One RS-232 port from the XChange3013 to J2

Second Slot I/O (XChange3013 and XPedite5205)

  • 10 10/100/1000BASE-T Gigabit Ethernet ports from the XChange3013 to J3
  • Three 10/100/1000BASE-T Gigabit Ethernet ports from the XPedite5205 Embedded Services Router to J3
  • Two RS-232 serial ports to J3

Slot-to-Slot Connectivity

  • Six 1000BASE-X Gigabit Ethernet ports

Power Supply

  • Integrated power supply
  • MIL-STD-704 28 VDC input voltage support
  • MIL-STD-461 EMI filtering

Thermal

  • The system is designed and tested to operate in ambient temperatures down to -40°C and extreme high temperatures.Maximum operating temperature is dependent on configuration and usage. Contact Sarsen Technology for further information.

Technical documents

Ordering information

For more information and pricing please contact Sarsen Technology.

NEWS

Associated products