TOTAL: £0.00





Intel® Xeon® D-1500 Family Processor-Based Rugged Small Form Factor (SFF) COTS System with 14-Port Gigabit Ethernet Switch & Router with Cisco IOS®

 The XPand6212 from Extreme Engineering (X-ES) is a true Commercial-Off-The-Shelf (COTS) rugged system based on the Intel Xeon D-1500 family (formerly Broadwell-DE) processors and a Gigabit Ethernet switch hosting an XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router.

With a compact design, the XPand6212 maximises processing and networking performance while optimising SWaP. The XPand6212 provides a true Small Form Factor (SFF) alternative to traditionally larger slot-based systems based on COTS 3U VPX modules.

The XPand6212’s first slot supports the XPedite7670 Intel® Xeon® D-1500 family based 3U VPX SBC. The XPand6212’s second slot supports the XChange3013 3U VPX Gigabit Ethernet switch. The XChange3013 can be configured as a fully managed Layer 2 switch or Layer 3 router.

The XChange3013 optionally supports compliance with the VICTORY specification as an Infrastructure Switch and Router. The XPedite5205 Cisco IOS® Router XMC can be installed on the XChange3013 to provide highly secure data, voice, and video communications to stationary and mobile network nodes.



Physical Characteristics

  • Chassis dimensions and weight are dependent on configuration, contact Sarsen Technology for assistance

Ethernet Management Features (Optional)

  • Layer 2 switching and Layer 3 routing
  • Extensive IEEE protocol and IETF RFC support
  • Configuration through CLI or SNMP
  • 196 MB packet buffer
  • VICTORY Infrastructure Switch and Router support
  • XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router XMC

Ethernet Switch Features

  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Energy Efficient Ethernet™ support
  • Non-blocking, full wire-speed
  • IEEE 1588v2 and SyncE support (optional)

First Slot I/O (XPedite7670)

  • Two 10/100/1000BASE-T Gigabit Ethernet ports to J2
  • One RS-232 port to J2
  • One USB 2.0 port to J2

Second Slot I/O (XChange3013 and XPedite5205)

  • 10 10/100/1000BASE-T Gigabit Ethernet switch ports to J3
  • Three 10/100/1000BASE-T Gigabit Ethernet router ports to J3
  • One 10/100/1000BASE-T Gigabit Ethernet switch port to J2

Slot-to-Slot Connectivity

  • Two 1000BASE-X Gigabit Ethernet ports

Power Supply

  • Integrated power supply
  • MIL-STD-704 28 VDC input voltage support
  • MIL-STD-461 EMI filtering


  • The system is designed and tested to operate in ambient temperatures down to -40°C and extreme high temperatures. Maximum operating temperature is dependent on configuration and usage. Contact Sarsen Technology for further information

Technical documents

Ordering information

For more information including pricing and availability please contact Sarsen Technology.


Associated products