FPGA Configuration

• Stratix® 10 FPGA L-tile (1SG280LU3F50E2VG) and H-tile (1SG280HU1F50E2VG) versions
• 10M16SAU169I7G MAX10 CPLD
• USB2.0 Micro connector for JTAG, UART and BMC access
• 1x NOR Flash 1GB quad SPI FPGA AS configuration
• 1x NOR Flash 1GB for Avalon-ST8 configuration mode

Memory

• 1x bank DDR4 VLP RDIMM 25° socket , 16GBytes, x72bit, up to 2400 MT/s *
  OR 1x bank QDR2+Xtrem 2 chips 72Mbit, x36bit, up to 633MHz, custom RDIMM
• 1x bank DDR4, 8GBytes, x72bit, up to 2400MT/s *
• 1x bank DDR4, 4GBytes, x72bit, up to 2400MT/s * (HPS bank mutual with FPGA)
• 2 x banks QDRII+ Xtrem 72Mbit each x18bit, up to 633MHz

* Please contact the sales team to understand the limitations of ES FPGA based boards

Communication Interfaces

• PCIe Gen3 x16 (Gen4 x8 capable)
• 2x QSFP28 quad optical cage (2 x 4 XCVR : 17 Gb/s or 28 Gb/s per link)
• 2x SAMTEC FireFly quad connector (17 Gb/s or 28Gb/s each XCVR) - 1 FireFly connected to 100G IP
• MiniSAS quad connector (1 HD SAS, 4 SATA HDD, NVMe interface capable)
• GPIO extension connector : 9 LVDS usable as 18 LVCMOS
• XCVR extension connector : 10 XCVR, 8 LVDS, Clock In&Out
• 36 dedicated HPS IO connector useable for custom daughter board for the SX version

Other resources

• Programmable PLL oscillator (Si5341), output clocks frequency between 0.0001 MHz to 750 MHz
• High precision oscillator, clock accuracy 20MHz- 0.05ppm for Precision Time Protocol (PTP) IEEE 1588
• One coax connector for PPS (pulse per second)
• Max10 USB Blaster on board, UART over USB interface
• Board Management Controller (BMC) for monitoring, EPCQ and clock programming, IPMI features

Power

• Max 240W, Delivered with a custom 1 slot PCIe passive heat-sink
• 8-pin ATX Power supply connector with Oring protection

Operating Range : 0°C to 70°C

Board Dimensions : 254mm x 111.15mm

Standards and compliance

• RoHS/REACH compliant
• UL certified
• ISO9001 Facility

Board Content

• Full height 1 slot PCIe board with passive heat-sink and PCIe bracket
• Board Support Package (Manuals, HDL test Designs, Extension connectors FPGA pinout connection)
• One DDR4 16 GB 2400 MT/s very low profile registered dual in-line memory module (VLP RDIMM)
• Kernel Linux support, U-boot bootloader and comprehensive user documentation
• Operating System Support (Software package support for DDR4 SDRAM, eMMC flash, Quad SPI flash, USB host, Gigabit Ethernet, U-boot bootloader and comprehensive user documentation)