TOTAL: £0.00
home

email


Products

ENETX-MA4


Overview

Rugged 1553 and ARINC Ethernet Bridge/Converter

 
eNetX-MA4™ from Alta Data is an innovative product for “remoting” 1553 & ARINC-429/717 operations on 10/100/1000 Ethernet local area networks (LAN).
 
eNetX-MA4 is a very small, low-power, rugged device that provides real-time UDP connectivity to for 1-2 dual redundant 1553 (A/B) busses and 4 ARINC channels. Tested to MIL-STD-704F/810G/461F and DO160.
 

**NOTE: eNetX-MA4 (server) is a real-time Ethernet/1553 device, but your IP stack may not be! The eNetX-MA4 device provides real-time UDP receive and transmit requests (<10 uSecs) to data buffers, but the client’s IP/UDP stack will induce path delays as compared to backplane cards.

For most applications, this product will provide unparalleled flexibility in avionics configurations (much better than USB devices). Contact Sarsen for test results on various OS and computer configurations – your system results may vary.

Optional J1 and J2 Cable Assemblies Provided - please ask.

Technical

  • 1-2 Independent, Dual Redundant (A/B) MIL-STD-1553 Channels and Optional 4 ARINC Channels - Rugged MIL-810G/461/704, DO-160 Sec 22
  • Tested to MIL-STD-704F 810G 461F, DO160 Sec 22
  • Thin-Server, Real-Time UDP Ethernet ** - Abstract API or Straight BSD Sockets
  • FPGA State Machine – No Processor or Stack – Virus Proof
  • Auto BM/RX Mode for Auto 1553-ARINC->Ethernet Bridging
  • 5-32 VDC; 5V @ 7W Typical; One Channel < 5W; BM < 3W
  • Small 14.2 x 7 x 3.5cm, 270g without cabling
  • Standard 10/100/1000 Ethernet UDP
  • Glenair Mighty Mouse Connectors
  • SAE AS4111 5.2 Protocol (1553) Tested
  • Seven Avionics Discretes, TTL Clock, Trigger
  • IEEE-1588, IRIG-B PAM RX or 1, 5, 10 MHz PPS
  • Parts Temp (C) : -55 to +120 Storage, 0 to +70 Commercial, -40 to + 85 Extended Temp
  • Flash Disable Factory Setting for Secure Mem
  • NOTE: On shared channels: TX lines have an extra RX load; when powered-off, RX channels can have severe voltage drain – use only dedicated RX channels for critical systems.

Technical documents

Ordering information

There are a number of different configurations and optional accessories available. Please contact Sarsen to discuss your requirements.

 
Part Number Description
ENETX-MA4-1D4 ENETX Appliance with One Channel of Dual Redundant MIL-STD-1553 with Dual Function (BC/Mon or mRT/Mon) Capability and 4 Shared Tx/Rx Channels and 4 Rx Channels of ARINC-429 and 2 Rx/2 Tx ARINC-717 Selectable Channels (Each 717 Rx/Tx Replaces Two 429 Channels).
ENETX-MA4-2D4 ENETX Appliance with Two Channels of Dual Redundant MIL-STD-1553 with Dual Function (BC/Mon or mRT/Mon) Capability and 4 Shared Tx/Rx Channels and 4 Rx Channels of ARINC-429 and 2 Rx/2 Tx ARINC-717 Selectable Channels (Each 717 Rx/Tx Replaces Two 429 Channels).
ENETX-MA4-1F4 ENETX Appliance with One Channel of Dual Redundant MIL-STD-1553 with Full Function (BC/mRT and Mon) Capability and 4 Shared Tx/Rx Channels and 4 Rx Channels of ARINC-429 and 2 Rx/2 Tx ARINC-717 Selectable Channels (Each 717 Rx/Tx Replaces Two 429 Channels).
ENETX-MA4-2F4 ENETX Appliance with Two Channels of Dual Redundant MIL-STD-1553 with Full Function (BC/mRT and Mon) Capability and 4 Shared Tx/Rx Channels and 4 Rx Channels of ARINC-429 and 2 Rx/2 Tx ARINC-717 Selectable Channels (Each 717 Rx/Tx Replaces Two 429 Channels).
ENETXCAB-J1-01 ENETX J1 Ethernet
ENETXCAB-J2-01 ENETX J2 One Channel 1553
ENETXCAB-J2-02 ENETX J2 Two Channels 1553
ENETCON-J1-01 ENET J1 Mating Connector 401-007-16M10-26PA
ENETCON-J2-01 ENET J2 Mating Connector 401-007-16M10-26PB
ENETDCAP-J2-01 ENET2-J2 Dust Cap 667-214-M-N10
ENETDCAP-J2-01 ENET2-J2 Dust Cap 667-214-M-N10
Options: Example ENET2-MA4-2F4-AEFN
-A AltaView SW Full Functionality Enabled
-D Direct Coupling (Price Per Channel)
-E Ext Temp Parts (-40 to 45C)
-F Conformal Coating
-I Tx Inhibit (BM Function Only)
-N NVRAM Write Disabled

NEWS

Associated products