Products
XPedite5501
Overview
NXP QorIQ P2020 Ruggedized PMC XMC Module
The XPedite5501 from Extreme Engineering is an XMC/PrPMC single board computer supporting NXP (formerly Freescale) QorIQ P1 and P2 processors.
The XPedite5501 features up to 8 GB of DDR3-800 ECC SDRAM. A configurable SerDes interface (PCI Express or Serial RapidIO) to the XMC connector and a conventional PCI interface to the PMC connectors provide ample bandwidth to the P2020. Two Gigabit Ethernet ports, a USB 2.0 port, and two RS-232/422/485 serial ports are routed to P14 or P16 for additional system flexibility. A detachable front panel provides one Gigabit Ethernet port and one RS-232 serial port for development.
Hardware options range from commercial/air-cooled to full-military conduction-cooled conformally coated solutions. Operating system support packages for the XPedite5501 include Wind River VxWorks, QNX Neutrino, Green Hills INTEGRITY-178, and Linux 2.6.
Technical
- NXP QorIQ P2020 processor with dual Power Architecture® e500v2 cores at up to 1.2 GHz
- Alternate NXP QorIQ processors: P1011, P1020, and P2010
- Conduction cooling
- Extended shock and vibration tolerance
- Up to 8 GB of DDR3-800 ECC SDRAM
- x4 PCI Express or serial RapidIO interface to P15
- PCI PrPMC interface
- Two Gigabit Ethernet ports to P14 or P16
- Two RS-232/422/485 serial ports to P14 or P16
- One USB 2.0 port
- Up to 256 MB of NOR flash (with redundancy)
- Up to 16 GB of NAND flash
- Detachable front panel for development
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY-178 BSP
Specifications
Processor
- NXP (formerly Freescale) QorIQ P2020 processor
- Dual Power Architecture® e500v2 cores at up to 1.2 GHz
- 512 kB of shared L2 cache
Alternate Processor Configuration
- P1011 processor with one Power Architecture® e500v2 core at up to 800 MHz
- P1020 processor with two Power Architecture® e500v2 cores at up to 800 MHz
- P2010 processor with one Power Architecture® e500v2 core at up to 1.2 GHz
Memory
- Up to 8 GB of DDR3-800 SDRAM
- Up to 256 MB of NOR flash (with redundancy)
- Up to 16 GB of NAND flash
PrPMC Interface
- 66/33 MHz PCI
- 32-bit bus interface
P15 XMC Interface
- x4 configurable PCI Express or Serial RapidIO
P14/P16 XMC/PMC Interface
- Two Gigabit Ethernet ports
- Two RS-232/422/485 serial ports
- 3.3 V GPIO
- One USB 2.0 port
Front Panel I/O
- One Gigabit Ethernet port
- One RS-232 serial port
Software Support
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY-178 BSP
Physical Characteristics
- Conduction-cooled XMC/PMC form factor
- Dimensions: 143.75 mm x 74 mm, 10 mm stacking height
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating including Parylene available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please speak to your account manager.
Technical documents
Ordering information
There are a number of different configurations, including conformal coating and conduction cooling. Please speak to Sarsen Technology to discuss your requirements.
LOG IN /
