Ethernet

• One 40GBASE-KR4 Ethernet port (can be configured as four 10GBASE-KR)
• Six 10GBASE-KR Ethernet ports (can be configured as six 1000BASE-X)
• Four 10GBASE-T Ethernet ports
• Up to eight 1000BASE-T ports (see block diagram for mezzanine Ethernet port support options)
• IPv4 and IPv6 support
• Support for jumbo frames up to 10 kB
• Non-blocking, full wire-speed
• IEEE 1588v2 transparent clocking support

XMC

• One XMC site (optional)
• J16 RX-232 I/O routed to P1
• One 2500BASE-X and two 1000BASE-X Ethernet ports between J16 and the switch
• Optional support for up to two 1000BASE-T Ethernet ports from J14 to P2 or the switch

Ethernet Management Features

• Layer 2 switching
• Extensive IEEE protocol and IETF RFC support
• Configuration through CLI or SNMP
• 4 MB packet buffer

Additional Features

• Optional VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Physical Characteristics

• 3U VPX form factor
• Dimensions: 100 mm x 160 mm
• 0.8 in. or 1.0 in. pitch
• Compliant to the VITA 48.2 Type 1, Two-Level Maintenance (2LM) standard (optional)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.