TOTAL: £0.00
home

email


Products

XPand6208


Overview

4th Gen Intel® Core™ i7-Based Rugged Small Form Factor (SFF) COTS System with Cisco IOS® Router and 10 Gigabit Ethernet Switch

The XPand6208 is a rugged COTS system based on the 4th generation Intel® Core™ i7 (formerly Haswell) processor and a 10 Gigabit Ethernet switch. With a compact design based around 3U VPX modules and weighing just 4kgs, the XPand6208 maximises processing and networking performance while minimizing SWaP.

The XPand6208’s first slot supports the XPedite7570 3U VPX 4th generation Intel® Core™ i7-based SBC, mated with theXPort3301 dual 10 Gigabit Ethernet XMC, whilst the second slot supports the XChange3018 3U VPX 10 Gigabit Ethernet switch, which can be configured as a fully managed Layer 2 switch or Layer 3 router. The XChange3018 delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It supports IPv6, Energy Efficient Ethernet (EEE), and a comprehensive set of IETF RFCs and IEEE protocols. The XChange3018 optionally supports compliance with the VICTORY specification as an Infrastructure Switch and Router.

The XPedite5205 Cisco IOS® Router XMC can be installed on the XChange3018 to provide highly secure data, voice, and video communications to stationary and mobile network nodes. The system also supports the XPort6193 removable high-density SATA SSD memory module for highly secure and encrypted solid-state storage.


Technical

  • 4th Gen Intel® Core™ i7-based processor (formerly known as Haswell)
  • 5th Gen Intel® Core™ i7 (Broadwell-H) support available beginning Q4 2015
  • XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router (optional)
  • 10 Gigabit Ethernet switch
  • Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support (optional)
  • VICTORY Infrastructure Switch and Router support (optional)
  • Small Form Factor (SFF) sub-½ ATR system
  • Conduction- or convection- cooled chassis
  • Includes the XPedite7570 4th generation Intel® Core™ i7- based 3U VPX module
  • Includes the XPort3301 dual 10 Gigabit Ethernet XMC module
  • Includes the XChange3018 Gigabit and 10 Gigabit Ethernet switch
  • Removable Memory Bay (RMB) for XPort6193 rugged 2.5 in. SATA SSD memory module (optional)
  • Integrated 28 VDC power supply
  • MIL-STD-461E/F EMI filtering
  • Environmentally sealed
  • Circular connector support

Specifications

First Slot (XPedite7570 and XPort3301) Front Panel I/O via J2

  • XPedite7570 4th generation Intel® Core™ i7 processor-based 3U VPX SBC
  • XPort3301 dual 10 Gigabit Ethernet XMC
  • Two 10GBASE-T 10 Gigabit Ethernet ports
  • Two 10/100/1000BASE-T Gigabit Ethernet ports
  • Two RS-232/422/485 ports
  • Two USB ports
  • One external DisplayPort interface (optional)
 

Second Slot (XChange3018 and XPedite5205) I/O via J3

  • Four 10GBASE-T 10 Gigabit Ethernet ports
  • Six 10/100/1000BASE-T Gigabit Ethernet ports
  • XChange3018 10 Gigabit Ethernet 3U VPX switch
  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Energy Efficient Ethernet™ support
  • Non-blocking, full wire-speed
  • IEEE 1588v2 and SyncE support (optional)
 

Ethernet Management Features (Optional)

  • Layer 2 switching and Layer 3 routing
  • Extensive IEEE protocol and IETF RFC support
  • Configuration through CLI or SNMP
  • 196 MB packet buffer
  • VICTORY Infrastructure Switch and Router support
  • XPedite5205 Cisco IOS® Gigabit Ethernet Embedded Services Router XMC
 

Power Supply

  • Integrated power supply
  • MIL-STD-704 28 VDC input voltage support
  • MIL-STD-461 EMI filtering
  • Additional power supply options available
 

Thermal

  • The system is designed and tested to operate in ambient temperatures down to -40°C and extreme high temperatures. Maximum operating temperature is dependent on configuration and usage.
 

Removable Memory

  • XPort6193 rugged 2.5 in. SSD module
  • Up to 1 TB of SLC NAND flash
  • High reliability rugged connector
  • AES 256-bit encryption
  • ATA Secure Erase support
  • Declassification support

Technical documents

Ordering information

There are a number of different options available. Please contact Sarsen Technology for appropriate configurations based on your application requirements.