TOTAL: £0.00
home

email


Products

XPedite5970


Overview

NXP QorIQ T2080-Based Conduction- or Air-Cooled 3U VPX Module

The XPedite5970 from Extreme Engineering is a 3U OpenVPX™ REDI single board computer based on the NXP QorIQ T2080 processor. The T2080 processor offers eight virtual (four dual-threaded) e6500 cores, running at up to 1.8 GHz, and integrates a 128-bit AltiVec technology-based SIMD engine per core.

The XPedite5970 also supports up to 8 GB of DDR3-1600 SDRAM and provides a rich variety of I/O options to the backplane, including 10 Gigabit Ethernet, Gen3 PCIe, and Gen2 SRIO.

Wind River VxWorks, Linux, and Green Hills INTEGRITY Board Support Packages (BSPs) are available.


Technical

  • NXP T2080 processor with eight virtual Power Architecture® e6500 cores at up to 1.8 GHz
  • 128-bit AltiVec technology-based SIMD engine
  • Compatible with multiple VITA 65 OpenVPX™ slot profiles
  • 3U VPX (VITA 46) module
  • Ruggedized Enhanced Design Implementation (REDI)
  • Conduction or air cooling
  • Up to 8 GB of up to DDR3-1600 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of NAND flash
  • Hardware write protection for non-volatile memory
  • XMC/PrPMC interface
  • x4 PCI Express or Serial RapidIO or 10GbE XAUI fabric Fat Pipe P1.A fabric interconnect
  • x4 PCI Express or Serial RapidIO Fat Pipe P1.B fabric interconnect
  • Two SerDes Gigabit Ethernet Thin Pipe P1 fabric interconnects
  • Two 10/100/1000BASE-T Ethernet ports (optional)
  • Two SATA ports to P2 or to J16
  • Up to two RS-232/422/485 serial P2 ports
  • Two USB 2.0 ports to P2 (optionally, can route one port to front panel via plugover module)
  • Front I/O available via plugover module
  • Linux BSP
  • Wind River VxWorks BSP
  • Green Hills INTEGRITY BSP

Specifications

Processor

- NXP T2080 processor
- Eight virtual (four dual-threaded) Power Architecture® e6500 cores at up to 1.8 GHz
- 2 MB L2 cache
- 512 kB platform cache
- IEEE 754 Floating-Point Unit (FPU) support
- 128-bit AltiVec technology-based SIMD engine
 

Memory

- Up to 8 GB of up to DDR3-2133 ECC SDRAM
- Up to 512 MB of NOR flash (with redundancy)
- Up to 64 GB of NAND flash
 

VPX (VITA 46) P1 I/O

- x4 PCI Express, Serial RapidIO or 10GbE XAUI Fat Pipe to P1.A
- x4 PCI Express or Serial RapidIO Fat Pipe to P1.B
- Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port to P1 and one 10/100/1000BASE-T port to P2)
- X12d XMC P16 I/O
 

VPX (VITA 46) P2 I/O

- One 10/100/1000BASE-T port (when two SerDes Gigabit Ethernet P1 ports are not used)
- Two RS-232/422/485 serial ports
- Two USB 2.0 ports
- I²C port
- 3.3 V GPIO signals
- P64s PMC P14 I/O (optional)
- Two SATA ports capable of 6 Gb/s
 

XMC/PrPMC Site

- 32-bit, 66 MHz PCI bus (PMC interface)
- x4 PCIe port (XMC interface)
- P64s P14 I/O support (optional)
- X12d P16 I/O support
 

Front Panel I/O

- Front panel RJ-45 Ethernet, micro-DB-9 RS-232 serial ports, and USB available via optional plugover module
 

Software Support

- Linux BSP
- Wind River VxWorks BSP
- Green Hills INTEGRITY BSP
- QNX Neutrino BSP (contact factory)
- LynuxWorks LynxOS BSP (contact factory)
 

Physical Characteristics

- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 0.85 and 1.0 in. pitch with solder-side cover

Technical documents

Ordering information

There are a number of configurations available. Please contact Sarsen Technology to discuss your application.

NEWS