TOTAL: £0.00
home

email


Products

WABGM2 Chassis Manager


Overview

WILD Chassis Manager / System on Module

 The WABGM2 Chassis Manager / System on Module from Annapolis Micro Systems is VITA 46.11 conformant and SOSA-aligned, with a MPSoC UltraScale+ FPGA (ZU11EG). It includes an optional 3rd connector which adds 1/10GBASE-T Ethernet, a second MIL-1553 Interface, and three additional Zynq PL HSS.

The Chassis Manager/SoM is optimized for use with VITA 65/SOSA profiles that define all payload I/O and support backplane Maintenance ports (MP01/MP02) as they provide interfaces to multiplex these and/or export over ethernet allowing for access via chassis manager ethernet connection.

An optional Board Support Package (BSP) is available for custom application development and for additional feature support.

 


Technical

General

  • SOSA-aligned VITA 46.11 Chassis Manager / System on Module
  • Xilinx UltraScale+ ZU11EG MPSoC running Linux for CHmC
    • Processing Subsystem (PS)
      • Quad core A53 ARM running at 1.2 GHz
      • Dual core R5 ARM
      • 4GB DDR4 DRAM
      • 128MB QSPI NOR
    • Programmable Logic subsystem (PL)
      • 633K System Logic cells in Programmable Logic
      • 2GB DDR4 DRAM
      • 22.5Mb of UltraRAM
      • 128MB QSPI NOR
      • Dual 128KB battery backed NV SRAM
  • MicroSemi Polarfire MPF200T for security functions
    • 192K Logic Elements
    • 13.3 Mb Internal RAM
    • 297Kb internal uPROM bits
    • Boots from internal flash
    • SPI NOR for in system updates
  • Supports up to 16 slots for JTAG and Maintenance Port Aggregation/muxing
    • Provides 4 sets of MP01/MP02 and 2 sets of JTAG with dedicated select lines for each for further muxing on backplane
  • Directly attaches to backplane or carrier card for slot connections
  • Uses backplane only interface for I/O functions

Chassis Support Functions

  • Up to 2 Fan SPD and 1 Fan PWM interface
  • Up to 3 remote temperature sensing interfaces
  • Remote LEDs/Status for OverTemperature, Fan Fail and Power OK
  • Optional security functions for keyfill and zeroize

Other External Connections

  • Optional MIL-1553 interface
  • RS-232 UART for Zynq PS console (PS UART)
  • RS-232 UART for Maintenance port multiplexing (PL UART)
  • Two 10/100/1000 BASE-T interfaces from Zynq PS
  • Supports multiple battery inputs (from backplane or cable)
  • Optional 3rd Connector adds:
    • USB 2.0
    • One 10/100/1000 BASE-T Ethernet
    • 2nd MIL-1553 Interface
    • Additional 10 LVDS
    • Additional 4 ZYNQ PL HSS

Backplane Management Connections

  • 16 Individual maskable resets/GPIO
  • PS Inhibit/Fail for VITA 62 supplies
  • 4 Maintenance Port 1 interfaces (LVCMOS per SOSA)
  • 4 Maintenance Port 2 interfaces (LVCMOS per SOSA)
  • Four 3.3V JTAG interfaces
  • AUXCLK/REFCLK input
  • 20 ZYNQ PL GPIO (3.3V)
  • 2 10Gbps capable HSS connections to Zynq PL HSS
  • Dual IPMI connections per VITA 46.11
  • GDISCRETE, NVMRO and SYSRESET outputs

Optional Board Support Package (BSP)

  • Zynq and Polarfire development support
  • Enables customization of Zynq PS, PL and Microsemi logic
  • Required for some security functions
  • Order separately using P/N S00000-89

Environmental and Mechanical

  • Only requires 3.3V for operation
    • Designed to run from backplane 3.3VAUX
  • Optional support for -65C to 105C storage temperature
  • Optional support for -55C partial operation
  • Supports 3U and 6U backplanes
    • Does not cover any VITA 66/67 openings allowing for full support
    • Consumes 5 slots of backplane width

Ordering information

The WABGM0 is Annapolis-designed, and manufactured in USA.

Please request a quote using the orange button.

Associated products