TOTAL: £0.00
home

email


Products

XChange3021 3U VPX Switch


Overview

3U VPX PCI Express Gen3 and 10 Gigabit Ethernet Integrated Switch with XMC Support

The XChange3021 from Extreme Engineering Solutions is a conduction- or air-cooled, 3U OpenVPX™ integrated switch module supporting both PCI Express and Ethernet protocols.

The integrated PCI Express and Ethernet switch functionality allow XChange3021 to serve as the heart of inter-board communications inside a high-end OpenVPX™ system, and the external Gigabit Ethernet and/or 10 Gigabit Ethernet links provide connectivity between the OpenVPX™ system and the outside world.

Technical

  • Up to six x4 PCI Express Gen3 interfaces
  • One x8 PCI Express Gen3 interface to XMC
  • Up to eight 10GBASE-KR or 1000BASE-BX/KX Ethernet ports
  • Up to two 10GBASE-T Ethernet ports
  • Up to three 10/100/1000BASE-T Ethernet ports to XMC site
  • Layer 2 switching and Layer 3 routing management with extensive IEEE protocol and IETF RFC support (optional)
  • VICTORY Infrastructure Switch and Router support (optional)
  • Supports the XPedite5205 Cisco IOS® Embedded Services Router
  • Compatible with multiple VITA 65 OpenVPX™ switch slot profiles
  • Ruggedized Enhanced Design Implementation (REDI) per VITA 48
  • Conduction or air cooling
  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • IEEE 1588v2 support (optional)
  • NTP, SSH, SNMP, and DHCP server support (optional)
  • Integrated dual-core ARM A9 management processor

Specifications

Compatible OpenVPX™ Switch Slot Profiles

  • MOD3-SWH-6F6U-16.4.1-2
  • MOD3-SWH-6F6U-16.4.1-3
  • MOD3-SWH-6F6U-16.4.1-10
  • MOD3-SWH-6F6U-16.4.1-11
  • MOD3-SWH-6F8U-16.4.10-1
  • MOD3-SWH-6F8U-16.4.10-2


Ethernet Switch Management Controller

  • Integrated dual-core ARM A9 processor at up to 1.0 GHz
  • Up to 1 GB DDR3 ECC SDRAM
  • Up to 4 GB NAND flash
  • Dual-redundant SPI boot flash
  • RS-232 serial configuration interface
  • NTP, SSH, SNMP, and DHCP server support (optional)


Ethernet Ports

  • One 10-port, 10 Gigabit Ethernet switch
  • Up to eight 10GBASE-KR or 1000BASE-BX/KX Ethernet ports
  • Up to two 10GBASE-T Ethernet ports
  • Up to three 10/100/1000BASE-T Ethernet ports to XMC site


Ethernet Features

  • IPv4 and IPv6 support
  • Support for jumbo frames up to 12 kB
  • Advanced cable open/short detection
  • Energy Efficient Ethernet™ support
  • Non-blocking, full wire-speed Ethernet switch
  • IEEE 1588v2 support (optional)


Example Ethernet Configurations

Some restrictions apply when mixing 10 Gigabit and Gigabit Ethernet ports within a configuration. Please speak to your account manager for more information.
 
  • 6x 10GBASE-KR/1000BASE-BX/KX ports, 2x 10GBASE-T ports (default configuration)
  • 8x 10GBASE-KR / 1000BASE-BX/KX ports, 3x 10/100/1000BASE-T ports (XPedite5205 router configuration)
  • 8x 10GBASE-KR / 1000BASE-BX/KX ports, 1x 10GBASE-T port, 2x 10/100/1000BASE-T ports (PrXMC Ethernet configuration)


PCI Express

  • One 12-port, 48-lane PCI Express Gen3 switch
  • Six x4 PCI Express Gen3 interfaces to backplane
  • One x8 PCI Express Gen3 interface to XMC site


Physical Characteristics

  • 3U VPX form factor
  • Dimensions: 100 mm x 160 mm, 10 mm stacking height


Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.
  • Supported ruggedisation levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Technical documents

Ordering information

Contact Sarsen Technology to request a quote.

NEWS